{"title":"Amana Router Bits","description":"","products":[{"product_id":"46280-k-taperedballnose","title":"Amana - 46280-K - 1\/32\" Tapered Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46280-K - Tapered Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle: 6.2°\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/64\"\u003c\/li\u003e\n\u003cli\u003eTip Diameter: 1\/32\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 3 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecially designed for 2D and 3D CNC profiling and carving in plastic \u0026amp; wood with CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary Spektra™ coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.\u003c\/p\u003e\n\u003cp\u003eTools are manufactured with high balance that allows them to run up to 60,000 RPMs. Adjust your chip load and feed rate accordingly.\u003c\/p\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA perfect bit for 3D carving\u003c\/li\u003e\n\u003cli\u003ePrecision 2D and 3D large scale carving\u003c\/li\u003e\n\u003cli\u003eGreat for deep profiling\u003c\/li\u003e\n\u003cli\u003eDimensional signage\u003c\/li\u003e\n\u003cli\u003e3D millwork\u003c\/li\u003e\n\u003cli\u003e2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making\u003c\/li\u003e\n\u003cli\u003ePerfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eComposite\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eEthafoam***\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)**\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene Foam (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eFiberglass PCB Board\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eGraphite\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU)\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePhenolic Composites\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam***\u003c\/li\u003e\n\u003cli\u003ePolylam***\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003ePVC Foam Board\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eTooling Board\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXPE (Cross Linked Polyethylene) Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003cbr\u003e**Expanded polypropylene (EPP) is a foam form of polypropylene.\u003cbr\u003e***Ethafoam, Polyethylene, and Polylam are durable, flexible, closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Plastics\u003c\/strong\u003e:\u003cbr\u003eIn a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSuggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 30 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 10 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39247325823045,"sku":"AMANA-46280-K","price":114.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/2b95ddb520e5c9a98f4d9962dae939a2939aa424.jpg?v=1614262740"},{"product_id":"46282-k","title":"Amana - 46282-K - 1\/16\" Tapered Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46282-K - Tapered Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle: 5.4°\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/32\"\u003c\/li\u003e\n\u003cli\u003eTip Diameter: 1\/16\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 4 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecially designed for 2D and 3D CNC profiling and carving in plastic \u0026amp; wood with CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary Spektra™ coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.\u003c\/p\u003e\n\u003cp\u003eTools are manufactured with high balance that allows them to run up to 60,000 RPMs. Adjust your chip load and feed rate accordingly.\u003c\/p\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA perfect bit for 3D carving\u003c\/li\u003e\n\u003cli\u003ePrecision 2D and 3D large scale carving\u003c\/li\u003e\n\u003cli\u003eGreat for deep profiling\u003c\/li\u003e\n\u003cli\u003eDimensional signage\u003c\/li\u003e\n\u003cli\u003e3D millwork\u003c\/li\u003e\n\u003cli\u003e2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making\u003c\/li\u003e\n\u003cli\u003ePerfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eComposite\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eEthafoam***\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)**\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene Foam (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eFiberglass PCB Board\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eGraphite\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU)\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePhenolic Composites\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam***\u003c\/li\u003e\n\u003cli\u003ePolylam***\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003ePVC Foam Board\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eTooling Board\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXPE (Cross Linked Polyethylene) Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003cbr\u003e**Expanded polypropylene (EPP) is a foam form of polypropylene.\u003cbr\u003e***Ethafoam, Polyethylene, and Polylam are durable, flexible, closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Plastics\u003c\/strong\u003e:\u003cbr\u003eIn a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSuggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 30 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 8 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39247687548997,"sku":"AMANA-46282-K","price":114.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/a3e8ea213a238dcb4e9aaff57203f9804ed974dd.jpg?v=1614285467"},{"product_id":"46286-k-taperedballnose","title":"Amana - 46286-K - 1\/8\" Tapered Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46286-K - Tapered Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle: 3.6°\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/16\"\u003c\/li\u003e\n\u003cli\u003eTip Diameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 3 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecially designed for 2D and 3D CNC profiling and carving in plastic \u0026amp; wood with CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary Spektra™ coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.\u003c\/p\u003e\n\u003cp\u003eTools are manufactured with high balance that allows them to run up to 60,000 RPMs. Adjust your chip load and feed rate accordingly.\u003c\/p\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA perfect bit for 3D carving\u003c\/li\u003e\n\u003cli\u003ePrecision 2D and 3D large scale carving\u003c\/li\u003e\n\u003cli\u003eGreat for deep profiling\u003c\/li\u003e\n\u003cli\u003eDimensional signage\u003c\/li\u003e\n\u003cli\u003e3D millwork\u003c\/li\u003e\n\u003cli\u003e2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making\u003c\/li\u003e\n\u003cli\u003ePerfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eComposite\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eEthafoam***\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)**\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene Foam (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eFiberglass PCB Board\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eGraphite\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU)\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePhenolic Composites\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam***\u003c\/li\u003e\n\u003cli\u003ePolylam***\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003ePVC Foam Board\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eTooling Board\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXPE (Cross Linked Polyethylene) Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003cbr\u003e**Expanded polypropylene (EPP) is a foam form of polypropylene.\u003cbr\u003e***Ethafoam, Polyethylene, and Polylam are durable, flexible, closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Plastics\u003c\/strong\u003e:\u003cbr\u003eIn a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSuggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 50 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.001\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 17 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39247742271557,"sku":"AMANA-46286-K","price":114.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/20fa59d3d102febbd08424d3dccc3f00f28e629f.jpg?v=1614288031"},{"product_id":"46284-k-taperedballnose","title":"Amana - 46284-K - 1\/8\" Tapered Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46284-K - Tapered Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle: 1°\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/16\"\u003c\/li\u003e\n\u003cli\u003eTip Diameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 3 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecially designed for 2D and 3D CNC profiling and carving in plastic \u0026amp; wood with CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary Spektra™ coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.\u003c\/p\u003e\n\u003cp\u003eTools are manufactured with high balance that allows them to run up to 60,000 RPMs. Adjust your chip load and feed rate accordingly.\u003c\/p\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA perfect bit for 3D carving\u003c\/li\u003e\n\u003cli\u003ePrecision 2D and 3D large scale carving\u003c\/li\u003e\n\u003cli\u003eGreat for deep profiling\u003c\/li\u003e\n\u003cli\u003eDimensional signage\u003c\/li\u003e\n\u003cli\u003e3D millwork\u003c\/li\u003e\n\u003cli\u003e2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making\u003c\/li\u003e\n\u003cli\u003ePerfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eComposite\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eEthafoam***\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)**\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene Foam (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eFiberglass PCB Board\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eGraphite\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU)\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePhenolic Composites\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam***\u003c\/li\u003e\n\u003cli\u003ePolylam***\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003ePVC Foam Board\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eTooling Board\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXPE (Cross Linked Polyethylene) Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003cbr\u003e**Expanded polypropylene (EPP) is a foam form of polypropylene.\u003cbr\u003e***Ethafoam, Polyethylene, and Polylam are durable, flexible, closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Plastics\u003c\/strong\u003e:\u003cbr\u003eIn a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSuggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 50 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.001\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 17 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39247756820549,"sku":"AMANA-46284-K","price":131.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/fda45bc4fae6b2281871ffc7925ed54c9760724e.jpg?v=1614288756"},{"product_id":"46294-k-straightballnose","title":"Amana - 46294-K - 1\/4\" Straight Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46294-K - Straight Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle: 0.1°\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eTip Diameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecially designed for 2D and 3D CNC profiling and carving in plastic \u0026amp; wood with CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary Spektra™ coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.\u003c\/p\u003e\n\u003cp\u003eTools are manufactured with high balance that allows them to run up to 60,000 RPMs. Adjust your chip load and feed rate accordingly.\u003c\/p\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA perfect bit for 3D carving\u003c\/li\u003e\n\u003cli\u003ePrecision 2D and 3D large scale carving\u003c\/li\u003e\n\u003cli\u003eGreat for deep profiling\u003c\/li\u003e\n\u003cli\u003eDimensional signage\u003c\/li\u003e\n\u003cli\u003e3D millwork\u003c\/li\u003e\n\u003cli\u003e2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making\u003c\/li\u003e\n\u003cli\u003ePerfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eComposite\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eEthafoam***\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)**\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene Foam (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eFiberglass PCB Board\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eGraphite\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU)\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePhenolic Composites\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam***\u003c\/li\u003e\n\u003cli\u003ePolylam***\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003ePVC Foam Board\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eTooling Board\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXPE (Cross Linked Polyethylene) Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003cbr\u003e**Expanded polypropylene (EPP) is a foam form of polypropylene.\u003cbr\u003e***Ethafoam, Polyethylene, and Polylam are durable, flexible, closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Plastics\u003c\/strong\u003e:\u003cbr\u003eIn a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSuggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.003\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 50 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39247774253125,"sku":"AMANA-46294-K","price":114.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/8e6e45fc105126c5de2a4fb6990d3c816872924b.jpg?v=1614290006"},{"product_id":"46490-k-straightballnose","title":"Amana - 46490-K - 1\/4\" Extra Long Straight Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46490-K - Extra Long Straight Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle: 0.1°\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eTip Diameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 4\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 3 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecially designed for 2D and 3D CNC profiling and carving in plastic \u0026amp; wood with CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary Spektra™ coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.\u003c\/p\u003e\n\u003cp\u003eTools are manufactured with high balance that allows them to run up to 60,000 RPMs. Adjust your chip load and feed rate accordingly.\u003c\/p\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA perfect bit for 3D carving\u003c\/li\u003e\n\u003cli\u003ePrecision 2D and 3D large scale carving\u003c\/li\u003e\n\u003cli\u003eGreat for deep profiling\u003c\/li\u003e\n\u003cli\u003eDimensional signage\u003c\/li\u003e\n\u003cli\u003e3D millwork\u003c\/li\u003e\n\u003cli\u003e2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making\u003c\/li\u003e\n\u003cli\u003ePerfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eComposite\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eEthafoam***\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)**\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene Foam (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eFiberglass PCB Board\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eGraphite\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU)\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePhenolic Composites\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam***\u003c\/li\u003e\n\u003cli\u003ePolylam***\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003ePVC Foam Board\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eTooling Board\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXPE (Cross Linked Polyethylene) Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003cbr\u003e**Expanded polypropylene (EPP) is a foam form of polypropylene.\u003cbr\u003e***Ethafoam, Polyethylene, and Polylam are durable, flexible, closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Plastics\u003c\/strong\u003e:\u003cbr\u003eIn a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSuggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 34 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39247780249669,"sku":"AMANA-46490-K","price":160.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/27a8478bd96bb0a309f3cda1a109a85667170498.jpg?v=1614290509"},{"product_id":"46292-k","title":"Amana - 46292-K - 1\/8\" Flat Bottom","description":"\u003ch2\u003e\u003cstrong\u003e46292-K - Flat Bottom (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle: 0.1°\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-3\/32\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 4 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecially designed for 2D and 3D CNC profiling and carving in plastic \u0026amp; wood with CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary Spektra coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPMs up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.\u003c\/p\u003e\n\u003cp\u003eTools are manufactured with high balance that allows them to run up to 60,000 RPMs. Adjust your chip load and feed rate accordingly.\u003c\/p\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA perfect bit for 3D carving\u003c\/li\u003e\n\u003cli\u003ePrecision 2D and 3D large scale carving\u003c\/li\u003e\n\u003cli\u003eGreat for deep profiling\u003c\/li\u003e\n\u003cli\u003eDimensional signage\u003c\/li\u003e\n\u003cli\u003e3D millwork\u003c\/li\u003e\n\u003cli\u003e2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making\u003c\/li\u003e\n\u003cli\u003ePerfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eComposite\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eEthafoam***\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)**\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene Foam (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eFiberglass PCB Board\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eGraphite\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU)\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eLexan\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePALFOAM\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePhenolic Composites\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam***\u003c\/li\u003e\n\u003cli\u003ePolylam***\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003ePVC Foam Board\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eTooling Board\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXPE (Cross Linked Polyethylene) Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003cbr\u003e**Expanded polypropylene (EPP) is a foam form of polypropylene.\u003cbr\u003e***Ethafoam, Polyethylene, and Polylam are durable, flexible, closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMilling Plastics\u003c\/strong\u003e:\u003cbr\u003eIn a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSuggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 50 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.0007\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 13 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39248529227845,"sku":"AMANA-46292-K","price":86.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/48de437e389a303e6cc0127e25f423f728c1dace.jpg?v=1614350568"},{"product_id":"46424","title":"Amana - 46424 - 3\/16\" Spiral Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46424 - Spiral Ball Nose (Solid Carbide, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eRadius: 3\/32\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAmana Tool's high mirror-finish solid carbide up-cut spiral ball nose router bits are designed to eliminate tool marks that commonly appear when used with plastic and solid surface materials. Due to the highly polished finish and unique tool geometry, the spiral ball nose router bit delivers superior surface finish of at least 28 Ra (roughness average) in various materials. The up-cut router bits also eject chips up, to help prevent chip out on the bottom of the material.\u003cbr\u003e\u003cbr\u003eConstructed of special grade solid carbide, the Amana Tool spiral ball nose router bits last longer than traditional router bits and deliver superior cutting performance with plastics. The bits are ideal for use in a variety of applications spanning the mechanical, medical and woodworking industries.\u003c\/p\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Materials\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 80 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 40 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39251459244101,"sku":"AMANA-46424","price":83.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/a64400fd01dff6174d2ca86c3bb124a13d8ac1c0.jpg?v=1614614809"},{"product_id":"46426-spiralballnose","title":"Amana - 46426 - 1\/4\" Spiral Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46426 - Spiral Ball Nose (Solid Carbide, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAmana Tool's high mirror-finish solid carbide up-cut spiral ball nose router bits are designed to eliminate tool marks that commonly appear when used with plastic and solid surface materials. Due to the highly polished finish and unique tool geometry, the spiral ball nose router bit delivers superior surface finish of at least 28 Ra (roughness average) in various materials. The up-cut router bits also eject chips up, to help prevent chip out on the bottom of the material.\u003cbr\u003e\u003cbr\u003eConstructed of special grade solid carbide, the Amana Tool spiral ball nose router bits last longer than traditional router bits and deliver superior cutting performance with plastics. The bits are ideal for use in a variety of applications spanning the mechanical, medical and woodworking industries.\u003c\/p\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Materials\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 80 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 40 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39254259335237,"sku":"AMANA-46426","price":69.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/a000a09d6179ba0d3e4270212d0cdb8d55efca55.jpg?v=1614802578"},{"product_id":"46376-k-spiralballnose","title":"Amana - 46376-K - 1\/4\" Spiral Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46376-K - Spiral Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsed for carving decorative doors and sign manufacturing. Up-Cut design leaves an excellent finish and expels chips quickly.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eExcellent for Cutting\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSoft\/Hard Wood\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eSoft\/Hard Plastic\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 34 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39255077519429,"sku":"AMANA-46376-K","price":90.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/292e1ddb19b1108b12b18c3e91256da8dea18e93.jpg?v=1614876082"},{"product_id":"46380-k-spiralballnose","title":"Amana - 46380-K - 1\/2\" Spiral Ball Nose","description":"\u003ch2\u003e\u003cstrong\u003e46380-K - Spiral Ball Nose (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsed for carving decorative doors and sign manufacturing. Up-Cut design leaves an excellent finish and expels chips quickly.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eExcellent for Cutting\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSoft\/Hard Wood\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eSoft\/Hard Plastic\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 120 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.003\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39255114383429,"sku":"AMANA-46380-K","price":180.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/4d606cca88699f0565f35dcb9b2fd21a9ffb1b5b.jpg?v=1614880463"},{"product_id":"46460-spiralfluteplunge","title":"Amana - 46460 - 1\/4\" Spiral Flute Plunge","description":"\u003ch2\u003e\u003cstrong\u003e46460 - Spiral Flute Plunge (Solid Carbide, Corner Radius, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eRadius: 1\/16\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor carving, lettering, decorative doors and sign manufacturing.\u003cbr\u003eLeaves an excellent finish and expels chips quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExcellent for Cutting\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eSoft\/Hard Plastic\u003c\/li\u003e\n\u003cli\u003eSoft\/Hard Wood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 50 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39255118839877,"sku":"AMANA-46460","price":54.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/379922d453c7e8b62b556550d9dfe00c777224ed.jpg?v=1614881337"},{"product_id":"46180-k-compressionspiral","title":"Amana - 46180-K - 1\/8\" Compression Spiral","description":"\u003ch2\u003e\u003cstrong\u003e46180-K - Compression Spiral (Solid Carbide)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 13\/16\"\u003c\/li\u003e\n\u003cli\u003eUp Cut Height: 7\/32\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eSpecial unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Flawless compression cuts.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCFRP\u003c\/li\u003e\n\u003cli\u003eDouble Sided Melamine\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLaminated Plywood\u003c\/li\u003e\n\u003cli\u003eMelamine Particle Board\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eOriented Strand Board (OSB)*\u003c\/li\u003e\n\u003cli\u003eParticle Board\u003c\/li\u003e\n\u003cli\u003eSoftwood\/Hardwood\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cdiv\u003e*Oriented Strand Board is an engineered wood particle board.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 40 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 20 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39255125000261,"sku":"AMANA-46180-K","price":106.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/2465037a66273620627949cda4d01d1218c6c541.jpg?v=1614882297"},{"product_id":"46170-k-compressionspiral","title":"Amana - 46170-K - 1\/4\" Compression Spiral","description":"\u003ch2\u003e\u003cstrong\u003e46170-K - Compression Spiral (Solid Carbide)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eUp Cut Height: 7mm\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eSpecial unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Flawless compression cuts.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCFRP\u003c\/li\u003e\n\u003cli\u003eDouble Sided Melamine\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLaminated Plywood\u003c\/li\u003e\n\u003cli\u003eMelamine Particle Board\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eOriented Strand Board (OSB)*\u003c\/li\u003e\n\u003cli\u003eParticle Board\u003c\/li\u003e\n\u003cli\u003eSoftwood\/Hardwood\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cdiv\u003e*Oriented Strand Board is an engineered wood particle board.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.003\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 50 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259372879941,"sku":"AMANA-46170-K","price":119.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/9db3348a4105532ab910a4467109fb7a3c9a616a.jpg?v=1615215493"},{"product_id":"46172-k","title":"Amana - 46172-K - 3\/8\" Compression Spiral","description":"\u003ch2\u003e\u003cstrong\u003e46172-K - Compression Spiral (Solid Carbide)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eUp Cut Height: 9mm\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eSpecial unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Flawless compression cuts.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCFRP\u003c\/li\u003e\n\u003cli\u003eDouble Sided Melamine\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLaminated Plywood\u003c\/li\u003e\n\u003cli\u003eMelamine Particle Board\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eOriented Strand Board (OSB)*\u003c\/li\u003e\n\u003cli\u003eParticle Board\u003c\/li\u003e\n\u003cli\u003eSoftwood\/Hardwood\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cdiv\u003e*Oriented Strand Board is an engineered wood particle board.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.006\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 50 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259378778181,"sku":"AMANA-46172-K","price":164.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/73ae52a26c73a83d336a2fb8211db7b935041383.jpg?v=1615216087"},{"product_id":"46188-k-12compressionspiral","title":"Amana - 46188-K - 1\/2\" Compression Spiral","description":"\u003ch2\u003e\u003cstrong\u003e46188-K - Compression Spiral (Solid Carbide)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eUp Cut Height: 11mm\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eSpecial unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Flawless compression cuts.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCFRP\u003c\/li\u003e\n\u003cli\u003eDouble Sided Melamine\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLaminated Plywood\u003c\/li\u003e\n\u003cli\u003eMelamine Particle Board\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eOriented Strand Board (OSB)*\u003c\/li\u003e\n\u003cli\u003eParticle Board\u003c\/li\u003e\n\u003cli\u003eSoftwood\/Hardwood\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cdiv\u003e*Oriented Strand Board is an engineered wood particle board.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 120 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.006\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259386740805,"sku":"AMANA-46188-K","price":175.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/7a53cc6b9845398c62dff1a858f6fb4ac1de784f.jpg?v=1615216643"},{"product_id":"51410-k-18plasticcutting","title":"Amana - 51410-K - 1\/8\" Plastic Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51410-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eProduce super clean, smooth cuts especially in acrylic materials (Plexiglas® Lucite®) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using Amana’s unique process. Designed to eject chips up. Ideal for industrial applications and CNC machines. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003eAcetal and Nylon\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Material (ACM)\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®**\u003c\/li\u003e\n\u003cli\u003eCorrugated Plastics* such as Correx Boards and Polypropylene\u003c\/li\u003e\n\u003cli\u003eCrosslinked Polyethylene (XPE, PEX, XLPE)\u003c\/li\u003e\n\u003cli\u003eDelrin\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eExtruded Acrylic\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eGatorfoam®***\u003c\/li\u003e\n\u003cli\u003eHard Plastic\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU Board)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS) for digital printing\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eKing ColorCore® The Multi-Color Engravable Polymer Sheet.\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eLucite®\u003c\/li\u003e\n\u003cli\u003eMechanical\/Engineered Plastics\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003ePolystyrene (PS)\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSintra PVC\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eTeflon®\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eTrespa® Meteon®****\u003c\/li\u003e\n\u003cli\u003eUltra High Molecular Weight Polyethylene (UHMWPE)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eVinyl Flooring\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e*Corrugated Plastics such as Correx refers to a wide range of extruded twinwall plastic-sheet products produced from high-impact Polypropylene resin with a similar make-up to corrugated fiberboard. They are used in a variety of applications including boat building packaging signage outdoor advertising and the production of pet cages.\u003c\/p\u003e\n\u003cp\u003e**A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cp\u003e***Gatorfoam® Foam Board a polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.\u003c\/p\u003e\n\u003cp\u003e****Decorative high-pressure compact laminate (HPL) with an integral surface.\u003c\/p\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 60 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259438055493,"sku":"AMANA-51410-K","price":65.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/fb46ef2a69be9308a4a06ce42dee1f01aebd8bf4.jpg?v=1615221266"},{"product_id":"51411-k-18plasticcutting","title":"Amana - 51411-K - 1\/8\" Plastic Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51411-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eProduce super clean, smooth cuts especially in acrylic materials (Plexiglas® Lucite®) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using Amana’s unique process. Designed to eject chips up. Ideal for industrial applications and CNC machines. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003eAcetal and Nylon\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Material (ACM)\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®**\u003c\/li\u003e\n\u003cli\u003eCorrugated Plastics* such as Correx Boards and Polypropylene\u003c\/li\u003e\n\u003cli\u003eCrosslinked Polyethylene (XPE, PEX, XLPE)\u003c\/li\u003e\n\u003cli\u003eDelrin\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eExtruded Acrylic\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eGatorfoam®***\u003c\/li\u003e\n\u003cli\u003eHard Plastic\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU Board)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS) for digital printing\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eKing ColorCore® The Multi-Color Engravable Polymer Sheet.\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eLucite®\u003c\/li\u003e\n\u003cli\u003eMechanical\/Engineered Plastics\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003ePolystyrene (PS)\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSintra PVC\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eTeflon®\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eTrespa® Meteon®****\u003c\/li\u003e\n\u003cli\u003eUltra High Molecular Weight Polyethylene (UHMWPE)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eVinyl Flooring\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e*Corrugated Plastics such as Correx refers to a wide range of extruded twinwall plastic-sheet products produced from high-impact Polypropylene resin with a similar make-up to corrugated fiberboard. They are used in a variety of applications including boat building packaging signage outdoor advertising and the production of pet cages.\u003c\/p\u003e\n\u003cp\u003e**A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cp\u003e***Gatorfoam® Foam Board a polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.\u003c\/p\u003e\n\u003cp\u003e****Decorative high-pressure compact laminate (HPL) with an integral surface.\u003c\/p\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 60 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259468857413,"sku":"AMANA-51411-K","price":78.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/dfd8ff1944c98b6d55f05fdef5661c65c11d5d69.jpg?v=1615223989"},{"product_id":"51417-k-316plasticcutting","title":"Amana - 51417-K - 3\/16\" Plastic Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51417-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eProduce super clean, smooth cuts especially in acrylic materials (Plexiglas® Lucite®) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using Amana’s unique process. Designed to eject chips up. Ideal for industrial applications and CNC machines. Right hand helix right hand cut.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003eAcetal and Nylon\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Material (ACM)\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®**\u003c\/li\u003e\n\u003cli\u003eCorrugated Plastics* such as Correx Boards and Polypropylene\u003c\/li\u003e\n\u003cli\u003eCrosslinked Polyethylene (XPE, PEX, XLPE)\u003c\/li\u003e\n\u003cli\u003eDelrin\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eExtruded Acrylic\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eGatorfoam®***\u003c\/li\u003e\n\u003cli\u003eHard Plastic\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU Board)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS) for digital printing\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eKing ColorCore® The Multi-Color Engravable Polymer Sheet.\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eLucite®\u003c\/li\u003e\n\u003cli\u003eMechanical\/Engineered Plastics\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003ePolystyrene (PS)\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSintra PVC\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eTeflon®\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eTrespa® Meteon®****\u003c\/li\u003e\n\u003cli\u003eUltra High Molecular Weight Polyethylene (UHMWPE)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eVinyl Flooring\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e*Corrugated Plastics such as Correx refers to a wide range of extruded twinwall plastic-sheet products produced from high-impact Polypropylene resin with a similar make-up to corrugated fiberboard. They are used in a variety of applications including boat building packaging signage outdoor advertising and the production of pet cages.\u003c\/p\u003e\n\u003cp\u003e**A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cp\u003e***Gatorfoam® Foam Board a polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.\u003c\/p\u003e\n\u003cp\u003e****Decorative high-pressure compact laminate (HPL) with an integral surface.\u003c\/p\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 60 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259475443781,"sku":"AMANA-51417-K","price":85.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/770094553f007d268ccc9d7b492f47e637058f29.jpg?v=1615224573"},{"product_id":"51404-k-14plasticcutting","title":"Amana - 51404-K - 1\/4\" Plastic Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51404-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eProduce super clean, smooth cuts especially in acrylic materials (Plexiglas® Lucite®) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using Amana’s unique process. Designed to eject chips up. Ideal for industrial applications and CNC machines. Right hand helix right hand cut.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003eAcetal and Nylon\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Material (ACM)\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®**\u003c\/li\u003e\n\u003cli\u003eCorrugated Plastics* such as Correx Boards and Polypropylene\u003c\/li\u003e\n\u003cli\u003eCrosslinked Polyethylene (XPE, PEX, XLPE)\u003c\/li\u003e\n\u003cli\u003eDelrin\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eExtruded Acrylic\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eGatorfoam®***\u003c\/li\u003e\n\u003cli\u003eHard Plastic\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU Board)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS) for digital printing\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eKing ColorCore® The Multi-Color Engravable Polymer Sheet.\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eLucite®\u003c\/li\u003e\n\u003cli\u003eMechanical\/Engineered Plastics\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003ePolystyrene (PS)\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSintra PVC\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eTeflon®\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eTrespa® Meteon®****\u003c\/li\u003e\n\u003cli\u003eUltra High Molecular Weight Polyethylene (UHMWPE)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eVinyl Flooring\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e*Corrugated Plastics such as Correx refers to a wide range of extruded twinwall plastic-sheet products produced from high-impact Polypropylene resin with a similar make-up to corrugated fiberboard. They are used in a variety of applications including boat building packaging signage outdoor advertising and the production of pet cages.\u003c\/p\u003e\n\u003cp\u003e**A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cp\u003e***Gatorfoam® Foam Board a polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.\u003c\/p\u003e\n\u003cp\u003e****Decorative high-pressure compact laminate (HPL) with an integral surface.\u003c\/p\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.006\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 100 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259525972037,"sku":"AMANA-51404-K","price":81.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/3a022214b22e21825801ba0871480f7e0d5598cd.jpg?v=1615228549"},{"product_id":"51405-k-14plasticcutting","title":"Amana - 51405-K - 1\/4\" Plastic Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51405-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eProduce super clean, smooth cuts especially in acrylic materials (Plexiglas® Lucite®) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using Amana’s unique process. Designed to eject chips up. Ideal for industrial applications and CNC machines. Right hand helix right hand cut.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003eAcetal and Nylon\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Material (ACM)\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®**\u003c\/li\u003e\n\u003cli\u003eCorrugated Plastics* such as Correx Boards and Polypropylene\u003c\/li\u003e\n\u003cli\u003eCrosslinked Polyethylene (XPE, PEX, XLPE)\u003c\/li\u003e\n\u003cli\u003eDelrin\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eExtruded Acrylic\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eGatorfoam®***\u003c\/li\u003e\n\u003cli\u003eHard Plastic\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU Board)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS) for digital printing\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eKing ColorCore® The Multi-Color Engravable Polymer Sheet.\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eLucite®\u003c\/li\u003e\n\u003cli\u003eMechanical\/Engineered Plastics\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003ePolystyrene (PS)\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSintra PVC\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eTeflon®\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eTrespa® Meteon®****\u003c\/li\u003e\n\u003cli\u003eUltra High Molecular Weight Polyethylene (UHMWPE)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eVinyl Flooring\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e*Corrugated Plastics such as Correx refers to a wide range of extruded twinwall plastic-sheet products produced from high-impact Polypropylene resin with a similar make-up to corrugated fiberboard. They are used in a variety of applications including boat building packaging signage outdoor advertising and the production of pet cages.\u003c\/p\u003e\n\u003cp\u003e**A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cp\u003e***Gatorfoam® Foam Board a polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.\u003c\/p\u003e\n\u003cp\u003e****Decorative high-pressure compact laminate (HPL) with an integral surface.\u003c\/p\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.006\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 100 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259534327877,"sku":"AMANA-51405-K","price":95.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/3369dc6f3aeb80bfcb5d41a24bfcb1cc3ffb14aa.jpg?v=1615229101"},{"product_id":"51504-k-14plasticcuttingdown-cut","title":"Amana - 51504-K - 1\/4\" Plastic Cutting (Down-Cut)","description":"\u003ch2\u003e\u003cstrong\u003e51504-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Down-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eProduce super clean, smooth cuts especially in acrylic materials (Plexiglas® Lucite®) other plastics and wood. Bits are made according to strict tolerances from an exclusive carbide grade and polished to a mirror finish using Amana’s unique process. Designed to eject chips up. Ideal for industrial applications and CNC machines. Right hand helix right hand cut.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003eAcetal and Nylon\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Material (ACM)\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®**\u003c\/li\u003e\n\u003cli\u003eCorrugated Plastics* such as Correx Boards and Polypropylene\u003c\/li\u003e\n\u003cli\u003eCrosslinked Polyethylene (XPE, PEX, XLPE)\u003c\/li\u003e\n\u003cli\u003eDelrin\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eExtruded Acrylic\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eGatorfoam®***\u003c\/li\u003e\n\u003cli\u003eHard Plastic\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU Board)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS) for digital printing\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eKing ColorCore® The Multi-Color Engravable Polymer Sheet.\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eLucite®\u003c\/li\u003e\n\u003cli\u003eMechanical\/Engineered Plastics\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003ePolystyrene (PS)\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eSintra PVC\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eTeflon®\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eTrespa® Meteon®****\u003c\/li\u003e\n\u003cli\u003eUltra High Molecular Weight Polyethylene (UHMWPE)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003cli\u003eVinyl Flooring\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e*Corrugated Plastics such as Correx refers to a wide range of extruded twinwall plastic-sheet products produced from high-impact Polypropylene resin with a similar make-up to corrugated fiberboard. They are used in a variety of applications including boat building packaging signage outdoor advertising and the production of pet cages.\u003c\/p\u003e\n\u003cp\u003e**A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003cp\u003e***Gatorfoam® Foam Board a polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.\u003c\/p\u003e\n\u003cp\u003e****Decorative high-pressure compact laminate (HPL) with an integral surface.\u003c\/p\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.006\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 100 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259547762757,"sku":"AMANA-51504-K","price":81.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/d16d225893aa5bb44c77841ac32f8abc36ecb479.jpg?v=1615230145"},{"product_id":"43500-18plasticcutting","title":"Amana - 43500 - 1\/8\" Plastic Cutting","description":"\u003ch2\u003e\u003cstrong\u003e43500 - Plastic Cutting (Solid Carbide, Single 'O' Flute)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNew solid carbide tools with unique circular 'O' flute design to eject chips more easily. Single flute for fast cutting in soft plastics such as PVC, styrene, ABS, etc.\u003c\/p\u003e\n\u003ch5\u003eExcellent for cutting\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eAcetal\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile Butadiene Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eCopolymer\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003eCoroplast®*\u003c\/li\u003e\n\u003cli\u003eCorrugated Polypropolyne\u003c\/li\u003e\n\u003cli\u003eDelrin\u003c\/li\u003e\n\u003cli\u003eEthylene-Vinyl Acetate\u003c\/li\u003e\n\u003cli\u003eFoam Board\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eGator Board\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eHigh Impact Polystyrene (HIPS)\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Laminates (HPL)\u003c\/li\u003e\n\u003cli\u003eHydroxy-Terminated Polyether (HTPE)\u003c\/li\u003e\n\u003cli\u003eLow Density Polyethylene (LDPE)\u003c\/li\u003e\n\u003cli\u003eLubX®\u003c\/li\u003e\n\u003cli\u003eLucite\u003c\/li\u003e\n\u003cli\u003eMechanical\/Engineered Plastics\u003c\/li\u003e\n\u003cli\u003eNitrite Rubber\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePerspex® Cast Acrylic Sheet\u003c\/li\u003e\n\u003cli\u003ePhenolic\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePolyethylene (PE)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate (PET)\u003c\/li\u003e\n\u003cli\u003ePolyethylene Terephthalate Glycol-Modified (PETG \/ PET-G)\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate\u003c\/li\u003e\n\u003cli\u003ePolypropylene (PP)\u003c\/li\u003e\n\u003cli\u003ePolyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde.\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Foam\u003c\/li\u003e\n\u003cli\u003eStarBoard® (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)\u003c\/li\u003e\n\u003cli\u003eStyrene-Acrylonitrile\u003c\/li\u003e\n\u003cli\u003eStyrene-Butadiene Rubber (SBR)\u003c\/li\u003e\n\u003cli\u003eStyrene-Isoprene-Styrene (SIS)\u003c\/li\u003e\n\u003cli\u003eTeflon®\u003c\/li\u003e\n\u003cli\u003eThermoplastic Polyolefin (TPO)\u003c\/li\u003e\n\u003cli\u003eUltra High Molecular Weight Polyethylene (UHMW)\u003c\/li\u003e\n\u003cli\u003eUrethane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*A soft plastic cardboard made with super soft, super flexible PVC.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 60 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259555856453,"sku":"AMANA-43500","price":45.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/424d5f49a147f3204cb1ed6bbdf9790959fd6c14.jpg?v=1615230729"},{"product_id":"51406-z-18aluminumcutting","title":"Amana - 51406-Z - 1\/8\" Aluminum Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51406-Z - Aluminum Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 5\/16\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eUsing the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for a variety CNC machining applications excellent for cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum RPM: \u003c\/strong\u003e35,000\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum 6061\u003c\/li\u003e\n\u003cli\u003eAluminum Alloys\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBrass\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eFomex® with Aluminum Face\u003c\/li\u003e\n\u003cli\u003eGold\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eSilver\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eIdeal for industrial applications our spiral ‘O’ flute router bits are manufactured using innovative techniques and materials that yield superior results with each cut and help make aluminum projects less labor-intensive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Never attempt to cut ferrous metals with these bits.\u003c\/p\u003e\n\u003cp\u003eInspect cut quality adjust feed \/ speed accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 60 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259593015365,"sku":"AMANA-51406-Z","price":83.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/49e67b797e76b0399bf8166148bfa6e29ef27c8f.jpg?v=1615233423"},{"product_id":"51474-z-18aluminumcutting","title":"Amana - 51474-Z - 1\/8\" Aluminum Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51474-Z - Aluminum Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eUsing the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for a variety CNC machining applications excellent for cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum RPM: \u003c\/strong\u003e35,000\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum 6061\u003c\/li\u003e\n\u003cli\u003eAluminum Alloys\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBrass\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eFomex® with Aluminum Face\u003c\/li\u003e\n\u003cli\u003eGold\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eSilver\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eIdeal for industrial applications our spiral ‘O’ flute router bits are manufactured using innovative techniques and materials that yield superior results with each cut and help make aluminum projects less labor-intensive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Never attempt to cut ferrous metals with these bits.\u003c\/p\u003e\n\u003cp\u003eInspect cut quality adjust feed \/ speed accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 60 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259597897797,"sku":"AMANA-51474-Z","price":75.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/51474-Z.jpg?v=1615233794"},{"product_id":"51454-z-18aluminumcutting","title":"Amana - 51454-Z - 1\/8\" Aluminum Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51454-Z - Aluminum Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eUsing the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for a variety CNC machining applications excellent for cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum RPM: \u003c\/strong\u003e35,000\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum 6061\u003c\/li\u003e\n\u003cli\u003eAluminum Alloys\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBrass\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eFomex® with Aluminum Face\u003c\/li\u003e\n\u003cli\u003eGold\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eSilver\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eIdeal for industrial applications our spiral ‘O’ flute router bits are manufactured using innovative techniques and materials that yield superior results with each cut and help make aluminum projects less labor-intensive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Never attempt to cut ferrous metals with these bits.\u003c\/p\u003e\n\u003cp\u003eInspect cut quality adjust feed \/ speed accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 60 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.004\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 60 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259602419781,"sku":"AMANA-51454-Z","price":88.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/770a20592e22d2ddfad4288093a497a51a05d367.jpg?v=1615233997"},{"product_id":"51408-z-316aluminumcutting","title":"Amana - 51408-Z - 3\/16\" Aluminum Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51408-Z - Aluminum Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eUsing the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for a variety CNC machining applications excellent for cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum RPM: \u003c\/strong\u003e35,000\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum 6061\u003c\/li\u003e\n\u003cli\u003eAluminum Alloys\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBrass\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eFomex® with Aluminum Face\u003c\/li\u003e\n\u003cli\u003eGold\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eSilver\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eIdeal for industrial applications our spiral ‘O’ flute router bits are manufactured using innovative techniques and materials that yield superior results with each cut and help make aluminum projects less labor-intensive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Never attempt to cut ferrous metals with these bits.\u003c\/p\u003e\n\u003cp\u003eInspect cut quality adjust feed \/ speed accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 80 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.005\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 80 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259628077125,"sku":"AMANA-51408-Z","price":81.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/fa3d8263633d50c15ba6edbcaee985c0fefbaae3.jpg?v=1615235877"},{"product_id":"51502-z-14aluminumcuttingdown-cut","title":"Amana - 51502-Z - 1\/4\" Aluminum Cutting (Down-Cut)","description":"\u003ch2\u003e\u003cstrong\u003e51502-Z - Aluminum Cutting (Solid Carbide, Spiral 'O' Flute, Down-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute Down-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eUsing the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for a variety CNC machining applications excellent for cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum RPM: \u003c\/strong\u003e35,000\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum 6061\u003c\/li\u003e\n\u003cli\u003eAluminum Alloys\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBrass\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eFomex® with Aluminum Face\u003c\/li\u003e\n\u003cli\u003eGold\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eSilver\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eIdeal for industrial applications our spiral ‘O’ flute router bits are manufactured using innovative techniques and materials that yield superior results with each cut and help make aluminum projects less labor-intensive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Never attempt to cut ferrous metals with these bits.\u003c\/p\u003e\n\u003cp\u003eInspect cut quality adjust feed \/ speed accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.006\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 100 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259633123397,"sku":"AMANA-51502-Z","price":80.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/0696f0a523124888573f42391d10437b7b12645b.jpg?v=1615236328"},{"product_id":"51402-z-14aluminumcutting","title":"Amana - 51402-Z - 1\/4\" Aluminum Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51402-Z - Aluminum Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo be used only on CNC machines and routers with automatic feeding.\u003c\/p\u003e\n\u003cp\u003eUsing the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for a variety CNC machining applications excellent for cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum RPM: \u003c\/strong\u003e35,000\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum 6061\u003c\/li\u003e\n\u003cli\u003eAluminum Alloys\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBrass\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eFomex® with Aluminum Face\u003c\/li\u003e\n\u003cli\u003eGold\u003c\/li\u003e\n\u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eSilver\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eIdeal for industrial applications our spiral ‘O’ flute router bits are manufactured using innovative techniques and materials that yield superior results with each cut and help make aluminum projects less labor-intensive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eRouter collet reduce­­r RB-102 (1\/4 to 1\/8) available for 1\/8 shank bits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Never attempt to cut ferrous metals with these bits.\u003c\/p\u003e\n\u003cp\u003eInspect cut quality adjust feed \/ speed accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eBenefits of Mirror-Finish\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRazor sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eEffortless chip removal\u003c\/li\u003e\n\u003cli\u003eHelps prevent chip re-welding\u003c\/li\u003e\n\u003cli\u003eExtends tool life\u003c\/li\u003e\n\u003cli\u003eExceptional cut quality\u003c\/li\u003e\n\u003cli\u003eDissipates heat well and prevents melting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.006\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 100 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259640823877,"sku":"AMANA-51402-Z","price":80.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/b4231fdba7a1ba5bf0832fb0ff2419e698875540.jpg?v=1615236787"},{"product_id":"51460-18steelcutting","title":"Amana - 51460 - 1\/8\" Steel Cutting","description":"\u003ch1\u003e\u003cstrong\u003e51460 - Steel Cutting (Solid Carbide End Mill, Up-Cut)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 3 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eThese router bits are manufactured from our exclusive ultra-fine micrograin carbide and feature a 30 degree Center Cutting Mill End with a 45 degree corner chamfer (for extra strength) up cut design and very importantly Aluminum Titanium Nitride (AlTiN) coating for superior cut quality.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIncrease the ruggedness of your solid carbide end mill's number one major wear point by the addition of corner chamfers that enhance the edge strength.\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel\u003c\/li\u003e\n\u003cli\u003eSteel\u003c\/li\u003e\n\u003cli\u003eCast Iron\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eLow Carbon Steel\u003c\/li\u003e\n\u003cli\u003eMagnesium\u003c\/li\u003e\n\u003cli\u003eMetal Composite Material (MCM)\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003eSuper Alloys\u003c\/li\u003e\n\u003cli\u003eTitanium (up to 40HRc Hardness)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eThese bits are perfect for the signmaking industry\u003c\/strong\u003e. Our special carbide grade combined with the AlTiN coating gives amazing performance. The unique corner chamfer gives the bits great strength.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eAlTiN Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eExtra wear resistance\u003c\/li\u003e\n\u003cli\u003eAllows for faster feed and speed rates\u003c\/li\u003e\n\u003cli\u003eCutting edge protected from wear\u003c\/li\u003e\n\u003cli\u003eBetter chip evacuation\u003c\/li\u003e\n\u003cli\u003eLess heat build up\u003c\/li\u003e\n\u003cli\u003eSuperior cutting quality and extended tool life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Inspect cut quality adjust feed and speed accordingly. Care should be taken to observe proper feeds and speeds according to the workpiece material to avoid damage.\u003c\/p\u003e\n\u003c\/div\u003e\nNote: For optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 30 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.0005\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 10 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259671691333,"sku":"AMANA-51460","price":80.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/7f880e9ccb813ade1bbca542f1bb006bd1edaba5.jpg?v=1615238795"},{"product_id":"51464-14steelcutting","title":"Amana - 51464 - 1\/4\" Steel Cutting","description":"\u003ch2\u003e\u003cstrong\u003e51464 - Steel Cutting (Solid Carbide End Mill, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-3\/8\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 3 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eThese router bits are manufactured from our exclusive ultra-fine micrograin carbide and feature a 30 degree Center Cutting Mill End with a 45 degree corner chamfer (for extra strength) up cut design and very importantly Aluminum Titanium Nitride (AlTiN) coating for superior cut quality.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIncrease the ruggedness of your solid carbide end mill's number one major wear point by the addition of corner chamfers that enhance the edge strength.\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel\u003c\/li\u003e\n\u003cli\u003eSteel\u003c\/li\u003e\n\u003cli\u003eCast Iron\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eLow Carbon Steel\u003c\/li\u003e\n\u003cli\u003eMagnesium\u003c\/li\u003e\n\u003cli\u003eMetal Composite Material (MCM)\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003eSuper Alloys\u003c\/li\u003e\n\u003cli\u003eTitanium (up to 40HRc Hardness)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eThese bits are perfect for the signmaking industry\u003c\/strong\u003e. Our special carbide grade combined with the AlTiN coating gives amazing performance. The unique corner chamfer gives the bits great strength.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eAlTiN Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eExtra wear resistance\u003c\/li\u003e\n\u003cli\u003eAllows for faster feed and speed rates\u003c\/li\u003e\n\u003cli\u003eCutting edge protected from wear\u003c\/li\u003e\n\u003cli\u003eBetter chip evacuation\u003c\/li\u003e\n\u003cli\u003eLess heat build up\u003c\/li\u003e\n\u003cli\u003eSuperior cutting quality and extended tool life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Inspect cut quality adjust feed and speed accordingly. Care should be taken to observe proper feeds and speeds according to the workpiece material to avoid damage.\u003c\/p\u003e\n\u003c\/div\u003e\nNote: For optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 50 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.0011\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 17 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259683356741,"sku":"AMANA-51464","price":81.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/64a809d27dad1eb090cd19d4849a9ac7f6bf289f.jpg?v=1615239508"},{"product_id":"51593-14steelcuttingmultihelix","title":"Amana - 51593 - 1\/4\" Steel Cutting Multi Helix","description":"\u003ch2\u003e\u003cstrong\u003e51593 - Steel Cutting Multi Helix (Solid Carbide, Square Bottom, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 4 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eAmana Tool's variable helix tools are the superstars of carbide end mills for professionals and hobbyists alike. The variable helix eliminates harmonic chatter, so critical when surface finishes part dimension tolerances and tool life are of the utmost importance. Premium Aluminum Titanium Nitride (AlTiN) coating provides quantum increases in productivity either in terms of speed or longevity with or without coolant.\u003c\/p\u003e\n\u003cp\u003eThey are outstanding tools for peripheral milling and can take aggressive cuts along the full length of the overall flute length with no issues. They last much longer than general purpose end mills partly because they are coated partly because they dampen vibration which tends to break a sharp cutting edge down very quickly. For use with manual and automatic milling machines, as well as the most sophisticated CNC machines.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e4 Flute unique variable design for faster speeds and feeds.\u003c\/div\u003e\n\u003cdiv\u003eQuiet operation \u0026amp; better finishes.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel\u003c\/li\u003e\n\u003cli\u003eTitanium\u003c\/li\u003e\n\u003cli\u003eCast Iron\u003c\/li\u003e\n\u003cli\u003eSteel\u003c\/li\u003e\n\u003cli\u003eCermet*\u003c\/li\u003e\n\u003cli\u003eMetal Composite Material (MCM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e*Cermets are composites in which ceramic materials and metals join together.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eAlTiN Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eExtra wear resistance\u003c\/li\u003e\n\u003cli\u003eAllows for faster feed and speed rates\u003c\/li\u003e\n\u003cli\u003eCutting edge protected from wear\u003c\/li\u003e\n\u003cli\u003eBetter chip evacuation\u003c\/li\u003e\n\u003cli\u003eLess heat build up\u003c\/li\u003e\n\u003cli\u003eSuperior cutting quality and extended tool life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: Inspect cut quality adjust feed and speed accordingly. Care should be taken to observe proper feeds and speeds according to the workpiece material to avoid damage.\u003c\/p\u003e\n\u003c\/div\u003e\nNote: For optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 50 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.0011\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 13 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39259690172485,"sku":"AMANA-51593","price":61.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/5c7db48f758f8a83ec2fbf685035574208542b25.jpg?v=1615239968"},{"product_id":"45792-90foldingv-groove","title":"Amana - 45792 - 90° Folding V-Groove","description":"\u003ch2\u003e\u003cstrong\u003e45792 - 90° Folding V-Groove (For Aluminum Composite Material\/ACM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1\/2\"\u003c\/li\u003e\n\u003cli\u003eAngle (a°): 90°\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 3\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2\"\u003c\/li\u003e\n\u003cli\u003eB1: 13\/64\"\u003c\/li\u003e\n\u003cli\u003eType: Carbide Tipped V-Groove\u003c\/li\u003e\n\u003cli\u003eMax RPM: 35,000\u003c\/li\u003e\n\u003cli\u003eFlutes: 2\u003c\/li\u003e\n\u003cli\u003eD1: 0.090\"\u003c\/li\u003e\n\u003cli\u003ea1°: 45°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned for shaping Aluminum Composite (sandwich) Materials (ACM) with 90ª angle V-grooves with flat bottoms. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding\/creasing the remaining material by hand. Ideal for wall panel fabrication.\u003c\/p\u003e\n\u003cp\u003eACM is widely used for cladding many diverse exterior and interior applications such as office buildings, hospitals, convention centers, airports, and hotels. The long lasting durability of the material makes it an excellent choice for buildings, signage, displays, etc.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAcetate\u003c\/li\u003e\n\u003cli\u003eAluminum, Brass, Bronze, Clay, Zinc \u0026amp; Wood Composite Panels\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBakelite\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePE and FR Cores\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eThermoplastics\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e*Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. ACPs are frequently used for external cladding or facades of buildings, insulation, and signage.\u003c\/p\u003e\n\u003cp\u003e**Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 40 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.001\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 20 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39262184276037,"sku":"AMANA-45792","price":83.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/4eca7db6be1a75cb39c78078b139c38682567319.jpg?v=1615410395"},{"product_id":"45795-108foldingv-groove","title":"Amana - 45795 - 108° Folding V-Groove","description":"\u003ch2\u003e\u003cstrong\u003e45795 - 108° Folding V-Groove (For Aluminum Composite Material\/ACM)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1\/2\"\u003c\/li\u003e\n\u003cli\u003eAngle (a°): 108°\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 3\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2\"\u003c\/li\u003e\n\u003cli\u003eB1: 5\/32\"\u003c\/li\u003e\n\u003cli\u003eType: Carbide Tipped V-Groove\u003c\/li\u003e\n\u003cli\u003eMax RPM: 35,000\u003c\/li\u003e\n\u003cli\u003eFlutes: 2\u003c\/li\u003e\n\u003cli\u003eD1: 0.090\"\u003c\/li\u003e\n\u003cli\u003ea1°: 36°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned for shaping Aluminum Composite (sandwich) Materials (ACM) with 90ª angle V-grooves with flat bottoms. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding\/creasing the remaining material by hand. Ideal for wall panel fabrication.\u003c\/p\u003e\n\u003cp\u003eACM is widely used for cladding many diverse exterior and interior applications such as office buildings, hospitals, convention centers, airports, and hotels. The long lasting durability of the material makes it an excellent choice for buildings, signage, displays, etc.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAcetate\u003c\/li\u003e\n\u003cli\u003eAluminum, Brass, Bronze, Clay, Zinc \u0026amp; Wood Composite Panels\u003c\/li\u003e\n\u003cli\u003eAluminum 5052\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Materials (ACM)\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Panel (ACP)*\u003c\/li\u003e\n\u003cli\u003eALPOLIC® Copper Composite Material (CCM)\u003c\/li\u003e\n\u003cli\u003eAlucobond®\u003c\/li\u003e\n\u003cli\u003eAlupanel®\u003c\/li\u003e\n\u003cli\u003eBakelite\u003c\/li\u003e\n\u003cli\u003eDibond®\u003c\/li\u003e\n\u003cli\u003eDurabond**\u003c\/li\u003e\n\u003cli\u003ee-panel™\u003c\/li\u003e\n\u003cli\u003eEtalbond®\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePE and FR Cores\u003c\/li\u003e\n\u003cli\u003ePhenolics\u003c\/li\u003e\n\u003cli\u003ePlastic\/Acrylic\u003c\/li\u003e\n\u003cli\u003ePlexiglas®\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eThermoplastics\u003c\/li\u003e\n\u003cli\u003eTitanium Composite Material (TCM)\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e*Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. ACPs are frequently used for external cladding or facades of buildings, insulation, and signage.\u003c\/p\u003e\n\u003cp\u003e**Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 40 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.001\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 20 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39262227136581,"sku":"AMANA-45795","price":83.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/f38a31ac057c987aa3d44e9f06b03c0b09bdefdf.jpg?v=1615410821"},{"product_id":"45624-60v-groove","title":"Amana - 45624 - 60° V-Groove","description":"\u003ch2\u003e\u003cstrong\u003e45624 - 60° V-Groove (Solid Carbide)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle (a°): 60°\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 31\/64\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2\"\u003c\/li\u003e\n\u003cli\u003eB1: 7\/32\"\u003c\/li\u003e\n\u003cli\u003eMax RPM: 35,000\u003c\/li\u003e\n\u003cli\u003eFlutes: 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCut decorative V-Grooves and lettering on signs with these V-Groove bits. Use with an edge guide to chamfer and bevel edges. Can be used with handheld, table-mounted and CNC routers.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003cli\u003eAcrylic\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eComposite Decking\u003c\/li\u003e\n\u003cli\u003eFoam\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003eMelamine\u003c\/li\u003e\n\u003cli\u003ePlywood\u003c\/li\u003e\n\u003cli\u003ePVC Plastic\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXanita® Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 90 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 30 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39262267768901,"sku":"AMANA-45624","price":52.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/e58695b3fd6e5ef3842963573c8bcb3654f309c3.jpg?v=1615411305"},{"product_id":"45783-18carvingliner","title":"Amana - 45783 - 18° Carving Liner","description":"\u003ch2\u003e\u003cstrong\u003e45783 - 18° Carving Liner (Solid Carbide, for Extra-Fine Carving)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eAngle (a°): 18°\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 5\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eMax RPM: 35,000\u003c\/li\u003e\n\u003cli\u003eFlutes: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor extra-fine carving and lettering details.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for carving\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eBrass\u003c\/li\u003e\n\u003cli\u003eMDF\/Laminates\u003c\/li\u003e\n\u003cli\u003ePlywood\u003c\/li\u003e\n\u003cli\u003eSilver\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 90 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.005\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 90 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39262302732357,"sku":"AMANA-45783","price":72.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/27b3fd6a65b5c79d2758c28d76a0907d59a21858.jpg?v=1615411685"},{"product_id":"rc-1075","title":"Amana - RC-1075","description":"\u003ch2\u003e\u003cstrong\u003eRC1075 - In-Groove™ Tool Body \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eDescription: Tool Body (For various insert knives)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSolid carbide insert carbide knives produce crisp, clean cuts and last at least twice as long as comparable solid carbide bits. This industrial engraving tool body was engineered to quickly interchange inserts while the tool body remains mounted in your CNC machine. This minimizes down-time and helps to maintain consistent cutting accuracy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInsert knives sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCNC tool bodies are expertly balanced for virtually no vibration to provide superior cutting results.\u003c\/p\u003e\n\u003cp\u003eExcellent solution for etching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExcellent for cutting and engraving\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaminated materials\u003c\/li\u003e\n\u003cli\u003eVeneers\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003ePlastics\u003c\/li\u003e\n\u003cli\u003eSoft Wood\u003c\/li\u003e\n\u003cli\u003eHard Wood\u003c\/li\u003e\n\u003cli\u003ePhenolic\u003c\/li\u003e\n\u003cli\u003eSolid surface\u003c\/li\u003e\n\u003cli\u003eCarbon fiber\u003c\/li\u003e\n\u003cli\u003ePCB board\u003c\/li\u003e\n\u003cli\u003eHDPE\u003c\/li\u003e\n\u003cli\u003eKing Starboard® \/ Marine Building Material\u003c\/li\u003e\n\u003cli\u003eAluminum brass \u0026amp; copper*\u003c\/li\u003e\n\u003cli\u003eCorian\u003c\/li\u003e\n\u003cli\u003ePoly (methyl methacrylate) (PMMA)\u003c\/li\u003e\n\u003cli\u003eAcrylic Stone\u003c\/li\u003e\n\u003cli\u003eCoroplast®**\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e*V-Tip inserts can also engrave aluminum brass \u0026amp; copper.\n\u003cp\u003e**A soft plastic cardboard made with super soft super flexible PVC.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264398868549,"sku":"AMANA-RC-1075","price":131.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/a379406c45549d897049b09661f7744088520188.jpg?v=1615470521"},{"product_id":"rck-360-30v-tipinsertknife","title":"Amana - RCK-360 - 30° V-Tip Insert Knife","description":"\u003ch2\u003e\u003cstrong\u003eRCK-360 - 30° V-Tip Insert Knife (Solid Carbide Insert)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCutting Height (B): 5\/8\" (16mm)\u003c\/li\u003e\n\u003cli\u003eTip Width (t): 0.005\"\u003c\/li\u003e\n\u003cli\u003eDescription: 80 Inch\/Min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264417710149,"sku":"AMANA-RCK-360","price":73.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/70e12747e5fd950c5997d5b06620b8563674a1b7.jpg?v=1615471536"},{"product_id":"rc-1045-45insertv-groove","title":"Amana - RC-1045 - 45° Insert V-Groove","description":"\u003ch2\u003e\u003cstrong\u003eRC-1045 - 45° Insert V-Groove (Solid Carbide Insert)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/2\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 13\/16\"\u003c\/li\u003e\n\u003cli\u003eAngle (a°): 45°\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 7\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2-3\/8\"\u003c\/li\u003e\n\u003cli\u003ea1°: 22.5°\u003c\/li\u003e\n\u003cli\u003eB1: 1-1\/16\"\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 1\u003c\/li\u003e\n\u003cli\u003eMax RPM: 24,000\u003c\/li\u003e\n\u003cli\u003eL1: 1-3\/8\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1\u003c\/li\u003e\n\u003cli\u003e# of knives: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe innovative CNC tool design uses the highest grade carbide insert knife. These industrial V-Groove insert router bits were especially designed for applications including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMiter folds - \"create the perfect joint\"\u003c\/li\u003e\n\u003cli\u003eSignmaking and lettering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplacement insert knife available \u003ca href=\"https:\/\/kjpselecthardwoods.com\/collections\/amana\/products\/rck-56-v-grooveinsertknife\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for carving\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum, Brass, Bronze, Copper, Gold, Silver \u0026amp; Carbon Fiber (Engraving Only)\u003c\/li\u003e\n\u003cli\u003eAcrylic\/Plastic\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eComposite Decking\u003c\/li\u003e\n\u003cli\u003eEpoxy (Epoxy Resins)\u003c\/li\u003e\n\u003cli\u003eFoam\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eMelamine\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXanita® Board*\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e*When working with Xanita LightBoard panel (X-board® X-board® plus) we recommend using MDF knives for better results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 40 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 40 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAdvantages of Insert Tooling\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLong lasting insert knives provide superior smooth quality cuts every time\u003c\/li\u003e\n\u003cli\u003eQuick and precise replacements of dull knives\u003c\/li\u003e\n\u003cli\u003eDue to insert accuracy tool life is extended\u003c\/li\u003e\n\u003cli\u003eInsert tooling allows for harder grades of carbide\u003c\/li\u003e\n\u003cli\u003eSpecial carbide grades for special applications\u003c\/li\u003e\n\u003cli\u003eCost effective solution compared to replacing brazed router bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eSecure locking screw system ensures maximum safety and maintains cutting accuracy. CNC router requires quality hold downs to ensure the least possibility of material shifting during operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264476037189,"sku":"AMANA-RC-1045","price":161.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/b4ae262b322635ba99d74b6662344fb4b5438587.jpg?v=1615474811"},{"product_id":"rc-1108-60insertv-groove","title":"Amana - RC-1108 - 60° Insert V-Groove","description":"\u003ch2\u003e\u003cstrong\u003eRC-1108 - 60° Insert V-Groove (Solid Carbide Insert)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/2\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1-1\/16\"\u003c\/li\u003e\n\u003cli\u003eAngle (a°): 60°\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 29\/32\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2-15\/32\"\u003c\/li\u003e\n\u003cli\u003ea1°: 30°\u003c\/li\u003e\n\u003cli\u003eB1: 1-1\/16\"\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 1\u003c\/li\u003e\n\u003cli\u003eMax RPM: 24,000\u003c\/li\u003e\n\u003cli\u003eL1: 1-3\/8\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1\u003c\/li\u003e\n\u003cli\u003e# of knives: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe innovative CNC tool design uses the highest grade carbide insert knife. These industrial V-Groove insert router bits were especially designed for applications including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMiter folds - \"create the perfect joint\"\u003c\/li\u003e\n\u003cli\u003eSignmaking and lettering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplacement insert knife available \u003ca href=\"https:\/\/kjpselecthardwoods.com\/collections\/amana\/products\/rck-56-v-grooveinsertknife\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for carving\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum, Brass, Bronze, Copper, Gold, Silver \u0026amp; Carbon Fiber (Engraving Only)\u003c\/li\u003e\n\u003cli\u003eAcrylic\/Plastic\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eComposite Decking\u003c\/li\u003e\n\u003cli\u003eEpoxy (Epoxy Resins)\u003c\/li\u003e\n\u003cli\u003eFoam\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eMelamine\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXanita® Board*\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e*When working with Xanita LightBoard panel (X-board® X-board® plus) we recommend using MDF knives for better results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 40 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 40 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAdvantages of Insert Tooling\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLong lasting insert knives provide superior smooth quality cuts every time\u003c\/li\u003e\n\u003cli\u003eQuick and precise replacements of dull knives\u003c\/li\u003e\n\u003cli\u003eDue to insert accuracy tool life is extended\u003c\/li\u003e\n\u003cli\u003eInsert tooling allows for harder grades of carbide\u003c\/li\u003e\n\u003cli\u003eSpecial carbide grades for special applications\u003c\/li\u003e\n\u003cli\u003eCost effective solution compared to replacing brazed router bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eSecure locking screw system ensures maximum safety and maintains cutting accuracy. CNC router requires quality hold downs to ensure the least possibility of material shifting during operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264688504901,"sku":"AMANA-RC-1108","price":170.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/f9bf3265a392ced5e385053017cd5c12a151da4e.jpg?v=1615488062"},{"product_id":"rck-56-v-grooveinsertknife","title":"Amana - RCK-56 - V-Groove Insert Knife","description":"\u003ch2\u003e\u003cstrong\u003eRCK-56 - V Groove Insert Knife (Solid Carbide Insert)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor Tool #: RC-1045, RC-1046, RC-1048, RC-1108, RC-1148\u003c\/li\u003e\n\u003cli\u003eType: Solid Carbide\u003c\/li\u003e\n\u003cli\u003eDimensions: 29mm x 9mm x 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264694140997,"sku":"AMANA-RCK-56","price":61.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/eee36befb6ed4ee7ee692fcc307b690ade94f4d7.png?v=1615488490"},{"product_id":"rc-1102-90insertv-groove","title":"Amana - RC-1102 - 90° Insert V-Groove","description":"\u003ch2\u003e\u003cstrong\u003eRC-1102 - 90° Insert V-Groove (Solid Carbide Insert)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/2\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003eAngle (a°): 90°\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 3\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 3\"\u003c\/li\u003e\n\u003cli\u003ea1°: 45°\u003c\/li\u003e\n\u003cli\u003eB1: 1-1\/16\"\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 1\u003c\/li\u003e\n\u003cli\u003eMax RPM: 18,000\u003c\/li\u003e\n\u003cli\u003eL1: 1-25\/32\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 1\u003c\/li\u003e\n\u003cli\u003e# of knives: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe innovative CNC tool design uses the highest grade carbide insert knife. These industrial V-Groove insert router bits were especially designed for applications including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMiter folds - \"create the perfect joint\"\u003c\/li\u003e\n\u003cli\u003eSignmaking and lettering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for carving\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum, Brass, Bronze, Copper, Gold, Silver \u0026amp; Carbon Fiber (Engraving Only)\u003c\/li\u003e\n\u003cli\u003eAcrylic\/Plastic\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eComposite Decking\u003c\/li\u003e\n\u003cli\u003eEpoxy (Epoxy Resins)\u003c\/li\u003e\n\u003cli\u003eFoam\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eMelamine\u003c\/li\u003e\n\u003cli\u003eMDF\/HDF\u003c\/li\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eSign Board\u003c\/li\u003e\n\u003cli\u003eSolid Surface\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003eXanita® Board*\u003c\/li\u003e\n\u003cli\u003e20lbs High Density Urethane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e*When working with Xanita LightBoard panel (X-board® X-board® plus) we recommend using MDF knives for better results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 40 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 40 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAdvantages of Insert Tooling\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLong lasting insert knives provide superior smooth quality cuts every time\u003c\/li\u003e\n\u003cli\u003eQuick and precise replacements of dull knives\u003c\/li\u003e\n\u003cli\u003eDue to insert accuracy tool life is extended\u003c\/li\u003e\n\u003cli\u003eInsert tooling allows for harder grades of carbide\u003c\/li\u003e\n\u003cli\u003eSpecial carbide grades for special applications\u003c\/li\u003e\n\u003cli\u003eCost effective solution compared to replacing brazed router bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eSecure locking screw system ensures maximum safety and maintains cutting accuracy. CNC router requires quality hold downs to ensure the least possibility of material shifting during operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264702857285,"sku":"AMANA-RC-1102","price":269.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/6105b1639eb523a12dc7400b0f816d5297feb456.jpg?v=1615489019"},{"product_id":"rck-134-v-grooveinsertknife","title":"Amana - RCK-134 - V-Groove Insert Knife","description":"\u003ch2\u003e\u003cstrong\u003eRCK-134 - V Groove Insert Knife (Solid Carbide Insert)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor Tool #: RC-1102\u003c\/li\u003e\n\u003cli\u003eType: Solid Carbide\u003c\/li\u003e\n\u003cli\u003eDimensions: 28mm x 12mm x 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264705675333,"sku":"AMANA-RCK-134","price":43.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/95052f04dc399db315588b34da804cff0568f587.jpg?v=1615489247"},{"product_id":"rc-2250-miniinsertspoilboard","title":"Amana - RC-2250 - 1-1\/2\" Mini Insert Flattening\/Spoilboard","description":"\u003ch2\u003e\u003cstrong\u003eRC-2250 - Mini Insert Spoilboard (Surfacing \u0026amp; Rabbeting with Scorer)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/2\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2-5\/16\"\u003c\/li\u003e\n\u003cli\u003eMax RPM: 24,000\u003c\/li\u003e\n\u003cli\u003eReplacement Knives: HMA-12, HCK-70\u003c\/li\u003e\n\u003cli\u003eType: Insert solid carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMini insert carbide spoilboard surfacing \u0026amp; rabbeting with scorer, great for cutting tight corners. Features unique 2+2 insert knife design that contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits. Great for surface planing.\u003c\/p\u003e\n\u003cp\u003eAlso suitable for router sled machines, \u003cimg title=\"Warning\" src=\"https:\/\/www.amanatool.com\/media\/wysiwyg\/warning-icon-yellow-new-1.jpg\" alt=\"\" width=\"20\" height=\"16\"\u003eMake sure that your router sled is fully stable and squared.\u003c\/p\u003e\n\u003ch5\u003ePerfect for\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eResurfacing spoilboards using CNC\u003c\/li\u003e\n\u003cli\u003e2+2 spoilboards contain two bottom scorers for better performance, finer surface finish and better clearance for 90º corners.\u003c\/li\u003e\n\u003cli\u003ePlaning large glued up panels using CNC\u003c\/li\u003e\n\u003cli\u003eSurfacing and finishing wood using timber slab machines\u003c\/li\u003e\n\u003cli\u003eRabbeting or slotting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eDesigned for planing \u0026amp; rabbeting the following materials\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eFiberboard\u003c\/li\u003e\n\u003cli\u003eHDF\/LDF\u003c\/li\u003e\n\u003cli\u003eBalsa Core*\u003c\/li\u003e\n\u003cli\u003eEpoxy (Epoxy Resins)*\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HDU Board)*\u003c\/li\u003e\n\u003cli\u003ePlastic\/Acrylic**\u003c\/li\u003e\n\u003cli\u003ePlywood\/Chipboard*\u003c\/li\u003e\n\u003cli\u003eHardwood\/Softwood*\u003c\/li\u003e\n\u003cli\u003eUltra-High-Molecular-Weight Polyethylene (UHMWPE)*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e*For optimal results and maximum insert life, replace inserts with optional general purpose knives #AMA-12 and #RCK-70 (sold separately).\u003c\/p\u003e\n\u003cp\u003e**Use lower CNC spindle RPM and adjusted feed-rate to prevent Melting and adhesion of the acrylic material to the tool.\u003c\/p\u003e\n\u003ch5\u003eFeaturing\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2+2 design\u003c\/li\u003e\n\u003cli\u003e4-sided solid carbide insert knives\u003c\/li\u003e\n\u003cli\u003eExclusive carbide grade for highest quality of cut\u003c\/li\u003e\n\u003cli\u003eMaximum cutting efficiency\u003c\/li\u003e\n\u003cli\u003eFaster material removal process\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThese industrial router bits feature solid carbide insert knives with four cutting edges that allow users to rotate the knife when one side becomes dull providing the highest-quality finish available on woodworking tools.\n\u003cp\u003eRecommendations: For surfacing solid woods it is recommended to remove both bottom scorers.\u003c\/p\u003e\n\u003cp\u003e\u003cimg title=\"Warning\" src=\"https:\/\/www.amanatool.com\/media\/wysiwyg\/warning-icon-yellow-new-1.jpg\" alt=\"\" width=\"20\" height=\"16\"\u003eProper torques rating to tighten down screws is 2-3Nm Torques.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 240 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.007\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 120 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264731201605,"sku":"AMANA-RC-2250","price":418.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/ec8c144129b46a4c010a431e18f7dd4add69a124.jpg?v=1615490293"},{"product_id":"46102-k-14spiralplunge","title":"Amana - 46102-K - 1\/4\" Spiral Plunge","description":"\u003ch2\u003e\u003cstrong\u003e46102-K - Spiral Plunge (Solid Carbide, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Up-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eSpiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut.\u003cbr\u003e\u003cbr\u003eThe ‘Up-Cut’ shears from the bottom up pulling chips from the bottom up thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising.\u003cbr\u003e\u003cbr\u003eSpecial unique carbide grade increased clearance geometry and razor-sharp cutting edges with polished flutes provide a superior finish and longer tool life especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard, plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eMelamine\u003c\/li\u003e\n\u003cli\u003eMelamine Particle Board\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.003\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 50 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264749617221,"sku":"AMANA-46102-K","price":60.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/dd5c0d293126c03760147512d2a704931a2e8f30.jpg?v=1615490895"},{"product_id":"46202-k-14spiralplungedown-cut","title":"Amana - 46202-K - 1\/4\" Spiral Plunge (Down-Cut)","description":"\u003ch2\u003e\u003cstrong\u003e46202-K - Spiral Plunge (Solid Carbide, Down-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFlutes: 2 Flute Down-Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eSpiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut.\u003cbr\u003e\u003cbr\u003eThe ‘Down-Cut’ cuts from the surface down leaving a smooth edge at the surface.\u003cbr\u003e\u003cbr\u003eSpecial unique carbide grade increased clearance geometry and razor-sharp cutting edges with polished flutes provide a superior finish and longer tool life especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard, plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5 class=\"top_text\" style=\"padding: 0px; font-size: 15px; font-family: Muli, sans-serif; margin: 15px 0px !important;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-weight: bold; font-size: 17px;\"\u003eExcellent for cutting\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLaminate\u003c\/li\u003e\n\u003cli\u003eMelamine\u003c\/li\u003e\n\u003cli\u003eMelamine Particle Board\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eVeneered Plywood\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eCoating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.\u003c\/li\u003e\n\u003cli\u003eCoating prevents high heat and oxidation which is detrimental to cutting tool performance.\u003c\/li\u003e\n\u003cli\u003eMulti-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.\u003c\/li\u003e\n\u003cli\u003enACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.\u003c\/p\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.003\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 50 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264758464581,"sku":"AMANA-46202-K","price":60.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/10ffb0e8941beb672ba9d028b0fab344ea0fd7c5.jpg?v=1615491219"},{"product_id":"46270-18foamcutting","title":"Amana - 46270 - 1\/8\" Foam Cutting","description":"\u003ch2\u003e\u003cstrong\u003e46270 - Foam Cutting (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 1-1\/8\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eDirection: Up-Cut\u003c\/li\u003e\n\u003cli\u003eType: Square End\u003c\/li\u003e\n\u003cli\u003eFlutes: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnsure your foam projects are milled with unparalleled accuracy detail and clarity. Achieve both precision and depth for foam carving and milling applications. Provides deeper cuts and larger slices with fewer passes in thick materials resulting in improved productivity and less assembly. The up-cut spiral ejects chips away from the workpiece.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrosslinked Polyethylene Foam (XLPE)\u003c\/li\u003e\n\u003cli\u003eEthafoam**\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)*\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFlexible Polyurethane Foam (FPF)\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HUD Board)\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam**\u003c\/li\u003e\n\u003cli\u003ePolylam**\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*Expanded polypropylene (EPP) is a foam form of polypropylene.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e**Ethafoam Polyethylene and Polylam are durable flexible closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eFor thick material with up-cut chip removal. For 2D \u0026amp; 3D CNC routing applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 40 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 20 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264815185989,"sku":"AMANA-46270","price":98.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/b46732e3cd98b28b9722104ae99394a8fe0906fc.jpg?v=1615493305"},{"product_id":"46272-14foamcutting","title":"Amana - 46272 - 1\/4\" Foam Cutting","description":"\u003ch2\u003e\u003cstrong\u003e46270 - Foam Cutting (Solid Carbide Spiral, Up-Cut)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank (d): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter (D): 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Height (B): 2-1\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length (L): 4\"\u003c\/li\u003e\n\u003cli\u003eDirection: Up-Cut\u003c\/li\u003e\n\u003cli\u003eType: Square End\u003c\/li\u003e\n\u003cli\u003eFlutes: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnsure your foam projects are milled with unparalleled accuracy detail and clarity. Achieve both precision and depth for foam carving and milling applications. Provides deeper cuts and larger slices with fewer passes in thick materials resulting in improved productivity and less assembly. The up-cut spiral ejects chips away from the workpiece.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrosslinked Polyethylene Foam (XLPE)\u003c\/li\u003e\n\u003cli\u003eEthafoam**\u003c\/li\u003e\n\u003cli\u003eEthylene-vinyl Acetate Foam (EVA)\u003c\/li\u003e\n\u003cli\u003eExpanded Polypropylene (EPP)*\u003c\/li\u003e\n\u003cli\u003eExpanded Polystyrene (EPS)\u003c\/li\u003e\n\u003cli\u003eExtruded Polystyrene Foam (XPS)\u003c\/li\u003e\n\u003cli\u003eFlexible Polyurethane Foam (FPF)\u003c\/li\u003e\n\u003cli\u003eFomex®\u003c\/li\u003e\n\u003cli\u003eHigh Density Urethane (HUD Board)\u003c\/li\u003e\n\u003cli\u003ePALFOAM™\u003c\/li\u003e\n\u003cli\u003ePolycarbonate (Lexan™)†\u003c\/li\u003e\n\u003cli\u003ePolyethylene Foam**\u003c\/li\u003e\n\u003cli\u003ePolylam**\u003c\/li\u003e\n\u003cli\u003ePolyurethane Foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*Expanded polypropylene (EPP) is a foam form of polypropylene.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e**Ethafoam Polyethylene and Polylam are durable flexible closed-cell foams with excellent memory.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eFor thick material with up-cut chip removal. For 2D \u0026amp; 3D CNC routing applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 100 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.002\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 50 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264817250373,"sku":"AMANA-46272","price":117.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/36ddc993356f496821c69150f612caf9e4f19828.jpg?v=1615493539"},{"product_id":"46308-compositehoneycomb","title":"Amana - 46308 - 3\/8\" Composite Honeycomb","description":"\u003ch2\u003e\u003cstrong\u003e46308 - Composite Honeycomb (Solid Carbide, 6-Flute)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3\"\u003c\/li\u003e\n\u003cli\u003eB1: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eMax RPM: 28,000\u003c\/li\u003e\n\u003cli\u003eFlutes: 6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSolid carbide honeycomb cutting router bits provide a burr-free top and bottom finish, providing that the workpiece is thicker than 0.250”. Designed for cutting Bioboard™, Falconboard®, Aluminum Honeycomb (AHP) carbon fiber and honeycomb cardboard.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eAluminum Honeycomb Panel (AHP)\u003c\/li\u003e\n\u003cli\u003eBioBoard™\u003c\/li\u003e\n\u003cli\u003eCarbon\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber\u003c\/li\u003e\n\u003cli\u003eCarbon Graphite\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eFalconboard®\u003c\/li\u003e\n\u003cli\u003eFiberglass Filled Plastics\u003c\/li\u003e\n\u003cli\u003eHoneycomb Cardboard\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003cli\u003eUnfilled Plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 320 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.003\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 54 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264843300933,"sku":"AMANA-46308","price":152.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/efa6ccaf4010c56e3c8bfa3f1977c7b0c458cd95.jpg?v=1615495185"},{"product_id":"46306-compositehoneycombhogger","title":"Amana - 46306 - 1\/4\" Composite Honeycomb Hogger","description":"\u003ch2\u003e\u003cstrong\u003e46306 - Composite Honeycomb Hogger (Solid Carbide, 6-Flute)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 4\"\u003c\/li\u003e\n\u003cli\u003eMax RPM: 25,000\u003c\/li\u003e\n\u003cli\u003eFlutes: 6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned to cut a large variety of honeycomb materials, hogger geometry is excellent for shredding and chip evacuation while maintaining a smooth surface.\u003cbr\u003e\u003cbr\u003eAmana Tool's \"hogger\" style routers for honeycomb composites incorporate a precision-ground \"knuckle\" profile, allowing a freer-cutting action that reduces power requirements and less sidewall pressure in low output spindles while giving impressive gains in feed-rates. ZrN coating greatly enhances durability in highly abrasive composites.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003eExcellent for cutting\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHoneycomb\u003c\/li\u003e\n\u003cli\u003eComposite Materials\u003c\/li\u003e\n\u003cli\u003eAcrylonitrile-Butadiene-Styrene (ABS)\u003c\/li\u003e\n\u003cli\u003eLexan™\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eZirconium Nitride (ZrN) Coating\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting\u003c\/li\u003e\n\u003cli\u003eHave the tendency to run\/spin much faster than an uncoated tool\u003c\/li\u003e\n\u003cli\u003eOptimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)\u003c\/li\u003e\n\u003cli\u003eHigh flute volume supports high feed rates and chip loads\u003c\/li\u003e\n\u003cli\u003eHigh aspect ratio for single pass deep-reach cutting\u003c\/li\u003e\n\u003cli\u003eFlute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\nFor optimal results and extended tool life use mist lubricant system or air cooling.\n\u003ch5\u003eSpeed and Feed Rate\u003c\/h5\u003e\n\u003cp\u003eCNC running parameters based on 1 x Diameter depth per pass:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: 18,000\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 320 IPM\u003c\/li\u003e\n\u003cli\u003eChip Load per tooth: 0.003\"\u003c\/li\u003e\n\u003cli\u003eRamp down Rate: 54 IPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"Default Title","offer_id":39264850477125,"sku":"AMANA-46306","price":131.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/6e62b8ea19d160862a396e8c79e90761554c0bdb.jpg?v=1615495535"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/collections\/amana-tools-logo_2606574a-df21-4be7-951d-32b39ce972be.png?v=1634311218","url":"https:\/\/www.woodvault.com\/collections\/amana-router-bits-1.oembed","provider":"KJP Select Hardwoods","version":"1.0","type":"link"}