{"title":"Countersink \u0026 Depth Stops","description":"","products":[{"product_id":"5mmdrillbitwithdepthstop","title":"Festool - 5mm Drill Bit with Depth Stop","description":"\u003ch2\u003eDrill bit BTA HW D 5 CE \u003c\/h2\u003e\n\u003ch3\u003e492522\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eCentrotec\u003c\/strong\u003e 5mm drill bit with depth stop. Replacement bit available (491794).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSave money by replacing just the bit and not the entire assembly\u003c\/li\u003e\n\u003cli\u003eSave time changing between drill and screw bits with the quick-change Centrotec System\u003c\/li\u003e\n\u003cli\u003eReduce fatigue with the lightweight Centrotec chuck and decrease drilling\/driving clearance with the compact design\u003c\/li\u003e\n\u003cli\u003eCentrotec bits extend directly into the drill spindle so they serve as an extension of the motor, significantly improving controllability and torque\u003c\/li\u003e\n\u003cli\u003eCarbide\u003c\/li\u003e\n\u003cli\u003eAdjustable depth stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Centrotec 5mm Drill Bit with Depth Stop","offer_id":31782339936325,"sku":"492522","price":93.0,"currency_code":"CAD","in_stock":true},{"title":"Replacement Bit","offer_id":31782339969093,"sku":"491794","price":46.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/2c465acd03d94ee69f4c9c057d683de9ebe32126.jpg?v=1597254225"},{"product_id":"35mmdrillbitwithcountersinkdepthstop","title":"Festool - 3.5mm Drill Bit with Countersink \u0026 Depth Stop","description":"\u003cdiv\u003e\n\u003ch2\u003eDrill countersink BSTA HS D 3.5 CE \u003c\/h2\u003e\n\u003ch3\u003e492523\u003c\/h3\u003e\n\u003cp\u003eAdjustable countersink drill bit with a free spinning depth stop for use with the \u003cstrong\u003eCentrotec\u003c\/strong\u003e system. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ½ pound, and the length is reduced by nearly 1-1\/2” with the Centrotec System. Most importantly, the Centrotec system offers a quicker and more secure means of bit change than any other quick-change chuck system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3.5mm fully adjustable countersink drill bit with depth stop\u003c\/li\u003e\n\u003cli\u003eDepth stop rotates freely, eliminating burning or marring of your finished surface\u003c\/li\u003e\n\u003cli\u003eSave money by only having to replace the bit and not the entire assembly\u003c\/li\u003e\n\u003cli\u003eLong, precision milled hex shank eliminates wobble, or run out during use\u003c\/li\u003e\n\u003cli\u003eAdjustable depth stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement bits\u003c\/strong\u003e are available in packs of 5 (Product Number 494445)\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"3.5mm Drill Bit with Countersink \u0026 Depth Stop","offer_id":31782385188933,"sku":"492523","price":125.0,"currency_code":"CAD","in_stock":true},{"title":"Replacement Bits (5 pack)","offer_id":31782385221701,"sku":"494445","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/825478ab51daa33ea6ad179ff8f6d0bfabfb4dc5.jpg?v=1597256418"},{"product_id":"45drillbitwithcountersinkdepthstop","title":"Festool - 4.5mm Drill Bit with Countersink \u0026 Depth Stop","description":"\u003cdiv\u003e\n\u003ch2\u003eDrill countersink BSTA HS D 4.5 CE\u003c\/h2\u003e\n\u003ch3\u003e492524\u003c\/h3\u003e\n\u003cp\u003eAdustable countersink drill bit with a free spinning depth stop for use with the \u003cstrong\u003eCentrotec\u003c\/strong\u003e system. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ½ pound, and the length is reduced by nearly 1-1\/2” with the Centrotec System. Most importantly, the Centrotec system offers a quicker and more secure means of bit change than any other quick-change chuck system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e4.5mm fully adjustable countersink drill bit with depth stop\u003c\/li\u003e\n\u003cli\u003eDepth stop rotates freely, eliminating burning or marring of your finished surface\u003c\/li\u003e\n\u003cli\u003eSave money by only having to replace the bit and not the entire assembly\u003c\/li\u003e\n\u003cli\u003eLong, precision milled hex shank eliminates wobble, or run out during use\u003c\/li\u003e\n\u003cli\u003eAdjustable depth stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement bits\u003c\/strong\u003e are available in packs of 5 (Product Number 494446)\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"4.5 Drill Bit with Countersink \u0026 Depth Stop","offer_id":31782400229445,"sku":"492524","price":125.0,"currency_code":"CAD","in_stock":true},{"title":"Replacement Bits (5 Pack)","offer_id":31782400262213,"sku":"494446","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/b809d32ab8f7ace49121da0cda1ee5414d6aa0f0.jpg?v=1597257199"},{"product_id":"centrotecpilotlesscountersink-2-8mm","title":"Festool - Centrotec Pilotless Countersink - 2-8mm","description":"\u003ch2\u003eCountersink QLS D 2-8 CE\u003c\/h2\u003e\n\u003ch3\u003e492520\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eCentrotec Pilotless Countersink, D2-8mm. Precision ground. Also compatible with standard 3-jawed chuck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSave time changing between countersink and screw bits with the quick-change Centrotec System\u003c\/li\u003e\n\u003cli\u003eReduce fatigue with the light weight Centrotec chuck and decrease drilling\/driving clearance with the compact design\u003c\/li\u003e\n\u003cli\u003eCentrotec bits extend directly into the drill spindle so they serve as an extension of the motor, significantly improving controllability and torque\u003c\/li\u003e\n\u003cli\u003eGetting the job done right the first time eliminates waste of material and fasteners and saves valuable time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":31817807691845,"sku":"492520","price":65.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/7c5ec53ff6861a375c2ed7d0adcd7930f517f703.jpg?v=1598967733"},{"product_id":"centrotecpilotlesscountersink-5-15mm","title":"Festool - Centrotec Pilotless Countersink - 5-15mm","description":"\u003ch2\u003eCountersink QLS D 5-15 CE \u003c\/h2\u003e\n\u003ch3\u003e492521\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eCentrotec Pilotless Countersink, D5-15mm. Precision ground. Also compatible with standard 3-jawed chuck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSave time changing between countersink and screw bits with the quick-change Centrotec System\u003c\/li\u003e\n\u003cli\u003eReduce fatigue with the light weight Centrotec chuck and decrease drilling\/driving clearance with the compact design\u003c\/li\u003e\n\u003cli\u003eCentrotec bits extend directly into the drill spindle so they serve as an extension of the motor, significantly improving controllability and torque\u003c\/li\u003e\n\u003cli\u003eGetting the job done right the first time eliminates waste of material and fasteners and saves valuable time\u003c\/li\u003e\n\u003cli\u003eFor pre-counterboring and flush screwing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":31817836953669,"sku":"492521","price":76.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/7c5ec53ff6861a375c2ed7d0adcd7930f517f703_e1fc451a-aa83-45d4-bcd7-d9d47fd334b7.jpg?v=1598968986"},{"product_id":"4mmdrillbitwithcountersinkdepthstop","title":"4mm Drill Bit with Countersink \u0026 Depth Stop","description":"\u003cdiv\u003e\n\u003ch2\u003eFestool Drill countersink BSTA HS D 4 L60 CE \u003c\/h2\u003e\n\u003ch3\u003e202392\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eAdjustable depth stop, especially designed for machining patio flooring:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eThe drill sinker makes it possible to countersink and drill patio flooring and substructures in a single step, eliminating the need to spend time switching between applications\u003c\/li\u003e\n\u003cli\u003eIndividually adjustable drilling depth for various applications\u003c\/li\u003e\n\u003cli\u003eThis long-life special drill bit used in conjunction with a long tool life ensures a long service life. The drill bit is also quick and easy to replace\u003c\/li\u003e\n\u003cli\u003eThanks to the CENTROTEC chuck, the drill countersink is compatible with the entire CENTROTEC system and is therefore incredibly precise: The hexagonal tools are centered by ball bearings – for optimized power transmission\u003c\/li\u003e\n\u003cli\u003ewith CENTROTEC interface\u003c\/li\u003e\n\u003cli\u003eCarbide drill with adjustable depth stop for precise drilling and countersinking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum drill depth: 2-3\/8\" (60mm)\u003c\/li\u003e\n\u003cli\u003eDiameter: 3\/16\" (4mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement bits\u003c\/strong\u003e are available in packs of 2 (Product Number 202393)\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"4mm Drill Bit with Countersink \u0026 Depth Stop","offer_id":32024834900037,"sku":"202392","price":105.0,"currency_code":"CAD","in_stock":true},{"title":"Replacement Bits (2 pack)","offer_id":32024834932805,"sku":"202393","price":46.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/4a7270009d65463a996e15705c1bb97f07f82580.jpg?v=1610032844"},{"product_id":"varioadjustablecountersink","title":"FAMAG - Adjustable Countersink","description":"\u003ch2\u003eFAMAG Adjustable Countersink VARIO, TCT\u003c\/h2\u003e\n\u003cp\u003eProfessional carbide tipped adjustable countersink, countersinking angle 90°. Can be clipped universally on all drill bits Ø 3-8 mm, incl. allen key. Ø 8 mm must be pushed into the countersink from behind with the flute in front.\u003c\/p\u003e\n\u003cp\u003eCountersinking of screw heads and drilling at the same time. Once the VARIO is fitted, you get the following dimensions (Ø drill bit\/countersink size); 3\/12, 4\/12.5, 5\/13.5, 6\/14.5, 7\/16, 8\/17.5 mm.\u003cspan style=\"font-family: Verdana; font-size: 13px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDrilling and countersinking in one single operation by direct clipping on drill bits (also intermediate sizes e.g. 5.5 mm). Suitable for all sorts of wood, laminated panels and many plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board.\u003c\/p\u003e","brand":"FAMAG","offers":[{"title":"Default Title","offer_id":39374257881157,"sku":"FAMAG-2202.000","price":44.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/famag-adjustable-countersink.png?v=1622559276"},{"product_id":"depthadjustingcollars","title":"FAMAG - Depth Adjusting Collars","description":"\u003ch2\u003eFAMAG Depth Adjusting Collars\u003c\/h2\u003e\n\u003cp\u003eClamp collar to be mounted on drill bits, with lateral attachment screw. For fixing on drill bits to adjust the drilling depth.\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e10mm Collar\u003c\/strong\u003e - Outside Diameter 20mm - 2108.010\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11mm Collar\u003c\/strong\u003e - Outside Diameter 20mm - 2108.011\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 pcs Set\u003c\/strong\u003e - 210108.505 (in plastic tube)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4, 5, 6, 8, 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e7 pcs Set\u003c\/strong\u003e - 2108.507 (in plastic tube)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3, 4, 5, 6, 8, 10, 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FAMAG","offers":[{"title":"10mm Collar","offer_id":40176868196421,"sku":"FAMAG-2108.010","price":22.95,"currency_code":"CAD","in_stock":false},{"title":"11mm Collar","offer_id":40176868163653,"sku":"FAMAG-2108.011","price":24.95,"currency_code":"CAD","in_stock":true},{"title":"5 pcs Set","offer_id":39374282326085,"sku":"FAMAG-2108.505","price":8.95,"currency_code":"CAD","in_stock":true},{"title":"7 pcs Set","offer_id":39374282358853,"sku":"FAMAG-2108.507","price":12.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/e4d47a6cfbe4a11459594677a82ba70ae6ef3044.png?v=1622557996"},{"product_id":"famag-forstnerdepthstop","title":"FAMAG - Forstner Depth Stop","description":"\u003ch2\u003eFAMAG Depth Stop Supported by Ball Bearing\u003c\/h2\u003e\n\u003cp\u003efor Series 1622, 1630, 1663\u003c\/p\u003e\n\u003cp\u003eThis depth-stop is supported by a ball-bearing mounted bushing and stops rotating as soon as it touches the work-piece. The guide bushing is mounted on the stalk using a grub screw and depth is adjusted accordingly. Blind holes can thus always be drilled at the same wanted depth. The depth-stop is made from ABS and has an outer diameter of 65 mm. The guide bushing is made of steel.\u003cbr\u003e\u003cbr\u003ePlease note, that the depth stop stands 44 mm high, which has to be facilitated with respect to the drill. For larger depths, it is possible to mount the guide bushing in reverse, in order to obtain a larger adjustment of the depth-stop. Here the Forstner bit should be larger than the guide bushing, which has a diameter of 26 mm.\u003cbr\u003e\u003cbr\u003eFor use with Forstner bits the stalk diameter has to match the inner diameter of the bushing. The stalk being the upper part of the bit not entering the chuck.\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-21mm\u003c\/strong\u003e - 1621.108\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22-27mm\u003c\/strong\u003e - 1621.110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28-35mm\u003c\/strong\u003e - 1621.112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36-40mm\u003c\/strong\u003e - 1621.114\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e42-48mm\u003c\/strong\u003e - 1621.116\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Stop Set\u003c\/strong\u003e - 1621.200 (in wooden case) \n\u003cul\u003e\n\u003cli\u003e10-48mm (contains 5 guide bushes, hex key and a pair of circlip pliers) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FAMAG","offers":[{"title":"10-21mm","offer_id":39374290387013,"sku":"FAMAG-1621.108","price":52.95,"currency_code":"CAD","in_stock":true},{"title":"22-27mm","offer_id":39374290419781,"sku":"FAMAG-1621.110","price":52.95,"currency_code":"CAD","in_stock":true},{"title":"28-35mm","offer_id":39374290452549,"sku":"FAMAG-1621.112","price":52.95,"currency_code":"CAD","in_stock":true},{"title":"36-40mm","offer_id":39374290485317,"sku":"FAMAG-1621.114","price":52.95,"currency_code":"CAD","in_stock":true},{"title":"42-48mm","offer_id":39374290518085,"sku":"FAMAG-1621.116","price":52.95,"currency_code":"CAD","in_stock":true},{"title":"Depth Stop Set","offer_id":39374290550853,"sku":"FAMAG-1621.200","price":134.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/FAMAG-Forstner-Depth-Stop.jpg?v=1622560015"},{"product_id":"amana-drill-bit-with-countersink-and-depth-stop","title":"Amana - Drill Bit with Countersink and Depth Stop","description":"\u003ch2\u003eCarbide Tipped 82 Degree Countersink with Adjustable Depth Stop and No-Thrust Ball Bearing\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eIncludes drill (slow spiral, High-Speed-Steel (HSS) M2 fully ground drill bit).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures an adjustable, heavy-duty, revolving depth-stop with a strong thrust ball bearing for quick and easy adjustment of the countersink depth without scratching or burning surfaces.\u003c\/p\u003e\n\u003cp\u003eIt also has an open space to allow for chip evacuation.\u003c\/p\u003e\n\u003cp\u003eThe user friendly design enables control of the drill length and its replacement, without the need to disassemble the depth-stop.\u003c\/p\u003e\n\u003cp\u003eEnables users to drill a pilot hole and tapered countersink in one step.\u003c\/p\u003e\n\u003cp\u003eThe adjustable depth-stop and independent stop collar prevent marking of the workpiece and perfect countersink depth control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA must have tool for every woodworker\u003c\/li\u003e\n\u003cli\u003e2-Wing\u003c\/li\u003e\n\u003cli\u003eQuick release 1\/4\" hex shank\u003c\/li\u003e\n\u003cli\u003eSlow spiral, HSS M2 fully ground drill bit included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eExcellent for Drilling:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNatural Woods\u003c\/li\u003e\n\u003cli\u003eMan-Made Boards\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eChipboard\u003c\/li\u003e\n\u003cli\u003ePlywood\u003c\/li\u003e\n\u003cli\u003eAluminum\/Non-Ferrous\u003c\/li\u003e\n\u003cli\u003eAluminum Composite Material (ACM)\u003c\/li\u003e\n\u003cli\u003eComposites\u003c\/li\u003e\n\u003cli\u003eComposite Decking Materials\u003c\/li\u003e\n\u003cli\u003eHigh Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e: When drilling aluminum\/non-ferrous materials, for optimal results and extended tool life use lubricant or air cooling. Make sure the material is fixed and drill is stable during drilling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Amana","offers":[{"title":"55225 - 3\/32\" Pilot","offer_id":39468539052101,"sku":"AMANA-55225","price":74.95,"currency_code":"CAD","in_stock":true},{"title":"55227 - 1\/8\" Pilot","offer_id":39468539084869,"sku":"AMANA-55227","price":74.95,"currency_code":"CAD","in_stock":true},{"title":"55229 - 5\/32\" Pilot","offer_id":39468539117637,"sku":"AMANA-55229","price":76.95,"currency_code":"CAD","in_stock":true},{"title":"55242 - 3\/16\" Pilot","offer_id":39468539150405,"sku":"AMANA-55242","price":81.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/Amana-DrillBitwithCountersinkandDepthStop-1.png?v=1629319664"},{"product_id":"auto-line-drill-guide","title":"Auto-Line Drill Guide","description":"\u003ch2\u003e\u003cstrong\u003eWoodpeckers Accurate Drilling Guide\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThere are those among us\u003c\/strong\u003e who can pick up a drill, place it on workpiece and drill a straight hole. Then, there are the remaining 99.9% of us. A drill press solves the problem... as long as the piece you want to drill fits. But if you're not one of the 0.1% and you want a straight hole in the middle of a large piece of plywood, or in an installed cabinet, or in anything you can't get to your drill press (or you don't have a drill press), you want to keep reading. Introducing Woodpeckers Auto-Line Drll Guide. This new tool keeps your drill bit perfectly perpendicular while you drill, but it goes further. Woodpeckers added a versatile base and fence system that makes it simple to keep your hole locations right on target. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Auto-Line starts\u003c\/strong\u003e with a high quality 1\/2\" chuck supported by a pair of sealed ball bearings. THe shaft end is a standard quick-release fitting that will fit any cordless or corded drill. The chuck carrier holds a pair of Teflon sleeves which ride on two stainless steel columns, keeping the chuck perfectly vertical while you drill. One column has a spring to help you control your cut and the other has an adjustable stop collar. Notice the stop collar column has a taper milled into it. The stop needs only fingertip pressure to hold position...it's nearly impossible to knock the stop out of position when the lock is tightened onto the taper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eThe base of the Auto-Line\u003c\/strong\u003e has laser engraved centerlines on the perimeter of the opening. Just align the bright white index marks with the witness marks on your stock for precise hole location. There's a vee-groove milled into the base to safely drill round stock. The opening in the base has a clearance for drills up to 3\/4\". When you need to drill holes larger than 3\/4\", simply remove the column caps, turn the chuck carrier around so it is outside the base and drill up to 2\" holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen you need holes centered\u003c\/strong\u003eon a baord, mount the centering pins in the base and rotate until one pin is tight against each side of the stock. Now your bit is perfectly centered. It works on stock up to 3-1\/8\" wide. The centering pins store conveniently right on the top of the base when they're not in use. We machined the Allen wrench to install the pins onto the bottom of the column caps... you'll never have to sort through that coffee can full of Allen wrenches to find the right one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe versatile fence\u003c\/strong\u003e adjusts to the base along a pair of stainless-steel guide rods. As shown in the photos, the fence can slide under the base for working close to an edge, or turn it around to get the maximum distance. When you're working on a narrow edge, position the fence so the broad face provides extra support. And, when you're not using the fence at all, turn it so the thin edge provides an \"outrigger\" to improve stability. The base is drilled and tapped for the fence guide rods on all four edges...right, left, front or back...there's always a direction you can extend the fence. A set of optional fence guide rod extensions adds either 12\" or 24\" to the basic fence capaity of 7\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products\u003c\/strong\u003e, the Auto-Line Drill Guide is precisely machined and carefully inspected in their Strongsville, Ohio factory (just south of Cleveland).\u003c\/p\u003e\n\u003ch5\u003eOptions\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeluxe Set (ALDG-21-DEL)\u003c\/strong\u003e - Comes with the Auto-Line Drill Guide, 6 extension rods, 2 flip stops and wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Line Drill Guide (ALDG-21) \u003c\/strong\u003e- 7\" guide rods, fence and wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip Stop Kit (ALDG-21-FSK)\u003c\/strong\u003e - Includes 2 flip stops, 2 extension rods and wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12\"-24\" Fence Guide Extension Rods (ALDG-EXT-21) \u003c\/strong\u003e- 4 x 12\" extension rods and wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip Stop (ALDG-21-FS)\u003c\/strong\u003e - 1 flip stop for Auto-Line Drill Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/YO-lWs5Ii4c\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Deluxe Set","offer_id":39626235117637,"sku":"ALDG-21-DEL","price":749.95,"currency_code":"CAD","in_stock":true},{"title":"Auto-Line Drill Guide","offer_id":39626235150405,"sku":"ALDG-21","price":559.95,"currency_code":"CAD","in_stock":true},{"title":"Flip Stop Kit","offer_id":39626235183173,"sku":"ALDG-21-FSK","price":125.95,"currency_code":"CAD","in_stock":false},{"title":"12\"-24\" Fence Guide Extension Rods","offer_id":39626235215941,"sku":"ALDG-EXT-21","price":79.95,"currency_code":"CAD","in_stock":false},{"title":"Flip Stop","offer_id":39626235248709,"sku":"ALDG-21-FS","price":43.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/auto-line-01.png?v=1637357715"},{"product_id":"famag-countersink-set-with-rotating-depth-stop","title":"FAMAG - Countersink Set with Rotating Depth Stop","description":"\u003ch2\u003eSeries 3577\u003c\/h2\u003e\n\u003cp\u003eHigh quality drill bit - countersink set with rotating depth stop. Depth of pre-drill is adjustable. Countersink angle 60°. This set is particularly well suited for deck construction. It makes it easy to drill screwholes and to countersink them properly and accurate in the deck boards. The depth stop is rotatably mounted and stops when it touches the workpiece. This prevents the depth stop from leaving marks on the deck boards. Adjust the depth so that the floor board is just perforated (board thickness). Thus, the self-tapping deck screw can find a perfect hold.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese depth stops feature a special brass cap which rotates with the depth stop. When the cap comes in contact with the workpiece, it stops rotating, which indicates that the desired depth has been reached; it also prevents the depth stop from making ugly friction marks on the work. Notches in the caps allow chips to escape.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBit made of Alloy Tool Steel\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShaft with flat to prevent the drill bit from slipping\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCountersink diameter 12 mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDepth stop diameter 29 mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe drill bit protrudes approx. 28 mm beyond the countersink. However, you can use any other wood or metal drill bit with a matching cylindrical shaft diameter. In effect, you’re free to choose the length of drill bit.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTotal length 88 mm (measured without protruding bit)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWith hex shank 6.35 mm (1\/4\")\u003c\/span\u003e\u003c\/p\u003e","brand":"FAMAG","offers":[{"title":"Default Title","offer_id":40176894967877,"sku":"FAMAG-3577.504","price":94.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/bohrer-senker-satz-324714.jpg?v=1657135724"},{"product_id":"famag-drill-rig-fixed-version","title":"Famag Drill Rig (Fixed Version)","description":"\u003ch2\u003eFAMAG Drill Rig, Fixed Version\u003c\/h2\u003e\n\u003cp\u003eWith additional handle, 2 stageless adjustable depth stops and 2 spiral springs for back stroke of the power drill. With adjustable drill bush plate for exact guidance of the drill bit and additional stabiliser at theend of the guide rods. Precise drilling in exact 90° setting angle. Easy back stroke of the power drill by spiral springs. Fixture set 1402.000: mountable on all FAMAG drill rigs with square foot. For power drills collar diameter 43 mm. For drill bits Ø 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm. Version with two solid guide rods. Tool holder and foot made of cast aluminium. Springs and guide posts made of stainless steel.\u003c\/p\u003e\n\u003cp\u003eRequires a 43mm collar which is a standard European size.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WisYAsaeAkA\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"FAMAG","offers":[{"title":"Default Title","offer_id":40502708076613,"sku":"FAMAG-1403.322","price":374.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/famag-drill-rig.png?v=1675451169"},{"product_id":"auto-angle-drill-guide","title":"Auto Angle Drill Guide","description":"\u003ch2\u003e\u003cstrong\u003eWoodpeckers Accurate Drilling Guide\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThere are several challenges \u003c\/strong\u003ewhen drilling angled holes. First is getting the angle correct, next is getting the direction of angle correct, and perhaps most important, you have to get the entry point correct. It's tough enough doing it on a drill press, but when you have to do it in the field or on a large workpiece, the challenges get...more challenging. Woodpeckers new AutoAngle Drill GUide marries the best features of the AutoLine Drill Guide to a clever protractor base that makes it amazingly simple to set up your drilling angle and hole location. If you can layout a crosshair on your material, you can put a hole through that crosshair at any angle you choose from straight up and down to a 40° angle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe protractor of the AutoAngle \u003c\/strong\u003eworks differently than most others on the market. While most designs rotate their angle from a pivot somewhere above the surface of the material, the AutoAngle has a \"virtual\" pivot point that is exactly on the surface of the material. This means the point of your drill bit enters the material at exactly the same point, regardless of drilling angle. Which, in turn, means you can locate your hole by aligning the index marks on the base of the AutoAngle to crosshairs on your material, even when you're drilling at an angle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThat feature alone puts the AutoAngle \u003c\/strong\u003e in a class of its own, but we didn't stop there. We built in a versatile fence and stop system that makes it a snap to position the AutoAngle at fixed distances from a square corner. The guide rods are extendable and work with both the fence and flip stops. You can add extra flip stops to drill a series of holes all the same distance from the edge of the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe protractor is locked in place \u003c\/strong\u003e by two large, comfortable hand-grips. They make it simple to lock the base and give you a safe, secure place to hold the AutoAngle. If you have to work tight in a corner, there is a multi-knob to replace one of the handles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThey've also included \u003c\/strong\u003ea pair of buttons that store on the base. Move them to the bottom of the base and place one on each side of your material to drill at the exact centre of your stock. Or, align the vee-blocks to each other and use them to align the AutoAngle on round stock. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe AutoAngle base makes it so simple \u003c\/strong\u003eto put your hole right where you want it. Align the machined reference points in the base to layout lines on your stock and you're on target. In fact, you only need three of the four marks to drill perfectly located holes. The chuck base slides off the guide rods easily for a clear view when you need to make a critical set up. There's ample room to add a clamp or two when needed, but the non-skid surface on the base handles the job in all but the trickiest situations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Basic AutoAngle\u003c\/strong\u003e includes the fence, a pair of 6-1\/2\" guide rods and a short multi-knob for close quarters work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Deluxe AutoAngle\u003c\/strong\u003e add sox 11\" guide rods and two flip stops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products, \u003c\/strong\u003ethe AutoAngle Drill guide is precisely machined and carefully inspected at their Strongsville, Ohio facility, just south of Cleveland.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2_ccmmtfmoA?si=kEFPH3GCK6eHp8Wi\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3\u003e\u003cstrong\u003eAutoAngle Specs:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eOverall Height of Tool:  13-3\/8\u003c\/span\u003e\u003cspan\u003e\"\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDimension of Base:  6-3\/8\u003c\/span\u003e\u003cspan\u003e\" x 8-7\/8\u003c\/span\u003e\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eChuck Capacity:  1\/16\u003c\/span\u003e\u003cspan\u003e\" - 1\/2\u003c\/span\u003e\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMaximum Drill Bit Size:  Diameter = 2-1\/2\u003c\/span\u003e\u003cspan\u003e\" \/ Length Overall = 8-1\/4\u003c\/span\u003e\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAngle Range:  Range of motion is 50°\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eStroke with Spring:  5-1\/4\u003c\/span\u003e\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eStroke Without Spring, Without Depth Stop:  7-5\/8\u003c\/span\u003e\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMaximum Fence Distance From Center of Bit: \u003cbr\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eBasic 10-1\/4\u003c\/span\u003e\u003cspan\u003e\" – \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eUsing long fence rods only.\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDeluxe 32-1\/2\u003c\/span\u003e\u003cspan\u003e\" – \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eUsing long fence rods and 2 sections of extension rods.\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eMaximum Stop Distance With Optional Stop Kit:  27\u003c\/span\u003e\u003cspan\u003e\" – \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eUsing short fence rods.\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodpeckers","offers":[{"title":"AutoAngle Drill Guide - Deluxe","offer_id":41516196626501,"sku":"AADG-DEL-22","price":1299.95,"currency_code":"CAD","in_stock":false},{"title":"AutoAngle Drill Guide - Standard","offer_id":41516196659269,"sku":"AADG-22","price":1190.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/1_5279bfb3-f23d-47cc-99c3-c27c489ff410.jpg?v=1714404994"},{"product_id":"festool-mobile-drill-guide-set","title":"Festool - Mobile Drill Guide Set","description":"\u003cstyle\u003e\u003c!--\ngreen {\n  color: white !important;\n  background-color: #42b24b;\n  padding: 10px;\n  border-radius: 5px;\n  font-style: italic;\n}\n--\u003e\u003c\/style\u003e\n\u003ch2\u003eMB 40 Hole Drilling Attachment\u003c\/h2\u003e\n\u003ch3\u003e577971\u003c\/h3\u003e\n\u003cp\u003eFor CXS 12, CXS\/TXS 18, TPC 18\/4, C 18 and T 18 with FastFix support (not for CXS\/TXS)\u003c\/p\u003e\n\u003cp\u003eGet straight, accurate holes every time—no guesswork. The MB 40 helps you drill perfectly at 90 degrees, whether you're on the jobsite or in the shop. Set your depth, line up your holes, and drill clean through wood, metal, or plastic. Need to drill straight down, into end grain, or make a row of holes? No problem. You can hook up dust collection right to the base, so you always see your mark. It’s another FastFix add-on that works with your Festool cordless drill and gives you more ways to get the job done right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrengths and Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDead-on accurate. Built tough and stable for clean, precise holes.\u003c\/li\u003e\n\u003cli\u003eDial it in. Set exact depth with easy-to-read scale—zero position included. Goes up to 2“ (50 mm), marked in both mm and inches.\u003c\/li\u003e\n\u003cli\u003eBuilt to adapt. Comes with side fence, end-stop, and guide rail adapter for edge work or long panels—repeatable and exact every time.\u003c\/li\u003e\n\u003cli\u003eFor 32 mm system. Hole series feature makes cabinet drilling simple.\u003c\/li\u003e\n\u003cli\u003eFast setup. Tool chuck locks in by hand—no extra tools needed. Use CENTROTEC for quick bit swaps.\u003c\/li\u003e\n\u003cli\u003eLine it up. Base plate markings help you place it right the first time.\u003c\/li\u003e\n\u003cli\u003eDust extractable. Hook up to a CT Dust Extractor with a D27 hose for a clean workspace.\u003c\/li\u003e\n\u003cli\u003eStays put. Rubber base grips tight—no slipping while you drill.\u003c\/li\u003e\n\u003cli\u003eAll in one box. Packed in a Systainer³ to keep everything in order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFSA-MB 40 guide rail adapter\u003c\/li\u003e\n\u003cli\u003eParallel side fence incl. stop for end face holes (PA-MB 40)\u003c\/li\u003e\n\u003cli\u003eHole series pin 5 mm\u003c\/li\u003e\n\u003cli\u003eHole series pin 3 mm\u003c\/li\u003e\n\u003cli\u003eTX 15 key\u003c\/li\u003e\n\u003cli\u003eSystainer Sys³ M 187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTechnical Data\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolder: \u003cstrong\u003eFastFix\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: \u003cstrong\u003e1.4kg (3.1lb)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeight: \u003cstrong\u003e312mm (12-1\/4\")\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBase: \u003cstrong\u003e110mm x 114mm (4-3\/8\" x 4-1\/2\")\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSetting range of depth stop: \u003cstrong\u003e0-50mm (0-2\")\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax drilling diameter: \u003cstrong\u003e40mm (1-9\/16\")\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDust extraction connection diameter: \u003cstrong\u003e27mm (1-1\/16\")\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStroke with depth stop, including spring: \u003cstrong\u003e187mm (7-3\/8\")\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStroke without depth stop, without spring: \u003cstrong\u003e203mm (8\")\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43472914153541,"sku":"577971","price":369.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/festool-mobile-drill-guide-set-2.png?v=1756913505"},{"product_id":"famag-drill-rig-pivoting-version","title":"Famag Drill Rig (Pivoting Version)","description":"\u003ch2\u003eFAMAG Drill Rig, Fixed Version\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWith additional handle, 2 stageless adjustable depth stops and 2 spiral springs for back stroke of the power drill. With adjustable plate for the drill bush for exact guidance of the drill bit and additional stabiliser at the end of the guide bars. 2 clamping levers for optimal locking at the desired angle. Precise drilling in exact 90° to 45° stepless pivoted setting angle. Easy back stroke of the power drill by spiral springs. Fixture set 1402.000: mountable on all FAMAG drill rigs with square foot. For power drills collar diameter 43 mm. For drill bits Ø 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm. Tool holder and foot made of cast aluminium. Springs and guide bars made of stainless steel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRequires a 43mm collar which is a standard European size.\u003c\/p\u003e","brand":"FAMAG","offers":[{"title":"Default Title","offer_id":44838751502405,"sku":"FAMAG-1404.322","price":567.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/pivotingdrillrig01.png?v=1775060073"},{"product_id":"famag-60-tct-drill-countersink-set-for-decking","title":"FAMAG - 60° TCT Drill-Countersink Set for Decking","description":"\u003ch2\u003e4-piece Drill Bit-Countersink Set TCT with Rotating Depth Stop 60°\u003c\/h2\u003e\n\u003ch3\u003e3578.504\u003c\/h3\u003e\n\u003cp\u003eHigh quality drill bit - countersink set with rotating depth stop. Depth of pilot drill is adjustable. Countersink angle 60°. This set is particularly well suited for terrace construction. It makes it easy to drill screwholes and to countersink them properly and accurate in the terrace boards. The depth stop is rotatably mounted and stops when it touches the workpiece. This prevents the depth stop from leaving marks on the terrace boards. Adjust the depth so that the floor board is just perforated (board thickness). Thus, the self-tapping terrace screw can find a perfect hold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/woodvault.com\/products\/famag-60-tct-drill-countersink-bits-for-decking?variant=44969052504133\"\u003e3, 4, 5mm pre-drill bit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/woodvault.com\/products\/famag-60-tct-drill-countersink-bits-for-decking?variant=44969052504133\"\u003e3, 4, 5mm countersink\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDepth stop with ball bearing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FAMAG","offers":[{"title":"Default Title","offer_id":44909233373253,"sku":"FAMAG-3578.504","price":131.55,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/FAMAG-60-TCT-Drill-Countersink-Set-for-Decking.webp?v=1776965278"},{"product_id":"famag-60-tct-drill-countersink-bits-for-decking","title":"FAMAG - 60° TCT Drill-Countersink Bits for Decking","description":"\u003ch2\u003eDrill Bit-Countersink Set TCT with Rotating Depth Stop 60°\u003c\/h2\u003e\n\u003cp\u003eHigh quality drill bit - countersink set with rotating depth stop. Depth of pilot drill is adjustable. Countersink angle 60°. This set is particularly well suited for terrace construction. It makes it easy to drill screwholes and to countersink them properly and accurate in the terrace boards. The depth stop is rotatably mounted and stops when it touches the workpiece. This prevents the depth stop from leaving marks on the terrace boards. Adjust the depth so that the floor board is just perforated (board thickness). Thus, the self-tapping terrace screw can find a perfect hold.\u003c\/p\u003e\n\u003cp\u003eFull set can be found \u003ca href=\"https:\/\/woodvault.com\/products\/famag-60-tct-drill-countersink-set-for-decking?variant=44909233373253\"\u003e\u003cstrong\u003ehere.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3578.030 \u003c\/strong\u003e- 3mm pre-drill bit and countersink, depth stop with ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3578.040\u003c\/strong\u003e - 4mm pre-drill bit and countersink, depth stop with ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3578.050\u003c\/strong\u003e - 5mm pre-drill bit and countersink, depth stop with ball bearing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FAMAG","offers":[{"title":"3578.030 - 3mm","offer_id":44969052504133,"sku":"3578.030","price":60.35,"currency_code":"CAD","in_stock":true},{"title":"3578.040 - 4mm","offer_id":44969052536901,"sku":"3578.040","price":60.35,"currency_code":"CAD","in_stock":true},{"title":"3578.050 - 5mm","offer_id":44969052569669,"sku":"3578.050","price":60.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/3578-504-02.png?v=1777997054"}],"url":"https:\/\/www.woodvault.com\/collections\/countersink-depth-stops.oembed","provider":"KJP Select Hardwoods","version":"1.0","type":"link"}