Famag router bits available to ship
Famag router bits available to ship
FAMAG - 8mm Professional Router Bit Set (22 pc)
FAMAG - 8mm Professional Router Bit Set (22 pc)

FAMAG - 8mm Professional Router Bit Set (22 pc)

The FAMAG 22-Piece Professional Router Bit Set features high-quality carbide bits with precision-ground 8mm shanks for smooth running and long service life.

Shank: 8mm
Includes: flush trim, dovetail, engraving, V-groove, round nose (x2), cove (x2), straight (x6), roundover (x2), bevel trim, chamfer, rabbeting, bull nose, panelling (x2), and 2 replacement ball bearings

$274.95

Available in stock

Description

Set of 22 bits in Plastic Case

3382.822

The FAMAG router bits of the 22-piece professional sets are characterised by the high quality carbide plates, which are soldered very gentle on the steel body. Low soldering temperatures reduce the hardening distortion considerably and affect the carbide mush less than conventional methods.

The shanks are machine wet cylindrical ground to the exact diamter of 8.0mm and thus have a perfectly concentricity. Only high-quality ball bearings are used.

As a result theser router bits run particularly smoothly and have an exceptional service life. Each router bit is marked and shows how deep it has to be inserted into the collet chuck of your router.

Set includes:

  • 1 - Flush Trim Bit with Ball Bearing (Diameter 12.7mm-1/2" / Cutting Length 25.4mm-1")
  • 1 - Dovetail Bit (Diameter 14.3mm-9/16" / Cutting Length 12.7mm-1/2")
  • 1 - Engraving Bit (Diameter 12.7mm-1/2" / 60° cutting angle)
  • 1 - V-Groove Bit (Diameter 12.7mm-1/2" / 90° cutting angle)
  • 2 - Round Nose Bit (Diameter 8mm-5/16" with Radius 4mm-5/32" / 12mm-15/32" with Radius 6mm-1/4")
  • 2 - Cove Bit with Ball Bearing (Diameter 19.5mm-3/4" with Radius 5mm-3/16" / 25.5mm-1" with Radius 8mm-5/16")
  • 6 - Straight Bits (Diameters 6mm-1/4" & 8mm-5/16" & 10mm-3/8" & 12mm-1/2" & 16mm-5/8" & 20mm-3/4" / Cutting Length 20mm-3/4")
  • 2 - Roundover Bits (Diameter 22.7mm-7/8" with Radius 5mm-3/16" & 28.7mm-1-1/8" with Radius 8mm-5/16")
  • 1 - Bevel Trim Bit (Diameter 19.9mm-25/32" / 22°)
  • 1 - Chamfer Bit (Diameter 28.6mm-1-1/8" / 45° cutting angle)
  • 1 - Rabbeting Bit (Diameter 31.8mm-1-1/4" / Cutting Length 12.7mm-1/2")
  • 1 - Bull Nose Bit (Diameter 22.2mm-7/8" / Radius 3.18mm-1/8")
  • 1 - Panelling Bit (Diameter 21mm-13/16" / Radius 5mm-3/16")
  • 1 - Paneling Bit with Ball Bearing (Diameter 27mm-1-1/16" / 4mm-5/32")
  • 2 - Replacement Ball Bearings (Radius 9.5mm-3/8" & 12.7mm-1/2")
Description

Set of 22 bits in Plastic Case

3382.822

The FAMAG router bits of the 22-piece professional sets are characterised by the high quality carbide plates, which are soldered very gentle on the steel body. Low soldering temperatures reduce the hardening distortion considerably and affect the carbide mush less than conventional methods.

The shanks are machine wet cylindrical ground to the exact diamter of 8.0mm and thus have a perfectly concentricity. Only high-quality ball bearings are used.

As a result theser router bits run particularly smoothly and have an exceptional service life. Each router bit is marked and shows how deep it has to be inserted into the collet chuck of your router.

Set includes:

  • 1 - Flush Trim Bit with Ball Bearing (Diameter 12.7mm-1/2" / Cutting Length 25.4mm-1")
  • 1 - Dovetail Bit (Diameter 14.3mm-9/16" / Cutting Length 12.7mm-1/2")
  • 1 - Engraving Bit (Diameter 12.7mm-1/2" / 60° cutting angle)
  • 1 - V-Groove Bit (Diameter 12.7mm-1/2" / 90° cutting angle)
  • 2 - Round Nose Bit (Diameter 8mm-5/16" with Radius 4mm-5/32" / 12mm-15/32" with Radius 6mm-1/4")
  • 2 - Cove Bit with Ball Bearing (Diameter 19.5mm-3/4" with Radius 5mm-3/16" / 25.5mm-1" with Radius 8mm-5/16")
  • 6 - Straight Bits (Diameters 6mm-1/4" & 8mm-5/16" & 10mm-3/8" & 12mm-1/2" & 16mm-5/8" & 20mm-3/4" / Cutting Length 20mm-3/4")
  • 2 - Roundover Bits (Diameter 22.7mm-7/8" with Radius 5mm-3/16" & 28.7mm-1-1/8" with Radius 8mm-5/16")
  • 1 - Bevel Trim Bit (Diameter 19.9mm-25/32" / 22°)
  • 1 - Chamfer Bit (Diameter 28.6mm-1-1/8" / 45° cutting angle)
  • 1 - Rabbeting Bit (Diameter 31.8mm-1-1/4" / Cutting Length 12.7mm-1/2")
  • 1 - Bull Nose Bit (Diameter 22.2mm-7/8" / Radius 3.18mm-1/8")
  • 1 - Panelling Bit (Diameter 21mm-13/16" / Radius 5mm-3/16")
  • 1 - Paneling Bit with Ball Bearing (Diameter 27mm-1-1/16" / 4mm-5/32")
  • 2 - Replacement Ball Bearings (Radius 9.5mm-3/8" & 12.7mm-1/2")