The easiest application yet!

Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.

• Easy to apply – used by both professionals and homeowners
• Extremely durable and hardwearing
• Can be spot-repaired and refreshed with no sanding required
• Microporous finish which does not crack, peel or flake
• Very water and dirt resistant as well as juice, tea, cola, wine, beer, coffee.
• Enhances the wood’s natural character
• Saliva-resistant and sweatproof, suitable for children’s toys

Coverage

Approx. Coverage 24m²/L (258 ft2/L) with one coat

Approx. Dry Time 8-10 hrs

Number of Coats 2 coats

BY HAND WITH FLEECE APPLICATOR PADS

• Apply two thin coats with our fleece applicator pads (best way to ensure you avoid over-application).
• Stir the Polyx®-Oil well and pour into tray
• Work the product into the wood thinly and evenly in figure 8 or circular motions using the fleece applicator pad
• Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
• Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
• Apply second coat following previous steps.

BY HAND WITH A CLOTH/RAG

Apply three thin coats with a lint-free microfibre cloth. ie. Osmo Easy Pads.

• Stir the Polyx®-Oil well and prior to use
• Work product into wood using cloth in a circular or figure 8 pattern
• Allow roughly 15-minutes for oils to penetrate
• Working with the grain, remove all excess product from surface
• Allow 8-10 hours drying time prior to recoating
• Apply second and third coats following previous steps
• WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container

BY HAND WITH SCOTCHBRITE PADS

Apply two thin coats with non-abrasive white scotchbrite pads

• Stir the Polyx®-Oil well and pour into tray
• Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad
• Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
• With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks
• Ensure all excess product is removed from surface
• Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
• Apply second coat following previous steps.